My Willys 3A and 3B Community
3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: BradleyDP on October 03, 2011, 10:43:03 PM
-
I want to mount my spare tire carrier to the side of my jeep. I know the bracket mounts at a 45� and on top of the support bracket. But don't know exactly how. I have a notch in my carrier doe it go up or down?
Any info on this let me know please. :-?
-
I had the same question about this time last year! ;D Here is the thread link:
http://cj-3a.com/forum/YaBB.pl?num=1292859169/4#4
It includes some great photos along with dimensions for the spare tire bracket. I have a repro tub and have had to drill all the holes in it for everything. If you need the locations for the footmans loops, there is also a thread out there for that also..
Good luck!
-
Thank you . I will check it out. Did not know there are footmans loops involved with the spare tire.
Can you send pictures of yours?
-
Sorry for the confusion! There are not any footman loops involved with the spare tire, only the bracket and a small piece of wood mounted over the wheel well to keep the tire from vibrating around. The footman loops I were refering to are the ones on the top and sides of the tub used to attatch a top, tie down gear, etc. Reproduction tubs and patch panels do not come with these holes drilled in them.
Again sorry for the confusion and good luck!