My Willys 3A and 3B Community
3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: RandyA on July 11, 2011, 10:33:15 PM
-
does anyone out there have a picture of a heater??? How many different configurations are there? I just pulled mine out and it has dual fans on top of heat exchanger....with a expanded metal shroud over the top too stop debris from entering unit...mine was plumbed with what looked like old steam hose...threaded fittings on one side and hose bib on other....as always ,Thanks in advance....
-
Hi Randy,
I know of the Harrison Heater, as it is the type that was installed in my Willys. �There have been others that are more square shaped. �The Harrison is shaped like a kidney I guess. �Below is a photo of mine. �It is disassembled and ready to be cleaned up. �This is a photo of the back side. �This was installed up under the dash on the passenger side.
Tim
(http://i1195.photobucket.com/albums/aa397/athawk11/harrisonheater1.jpg)
-
http://www.cj-2a.com/OEMparts/heaters/index.html
Larry
-
Here's a picture of the heater on the drivers side of my 54 3B. It has small doors on the front and sides that you open and close to control the heat.
(http://i56.tinypic.com/msgm4h.jpg)
-
Wow, my heater looks nothing like those...and I assumed it was OEM because it used the knock-outs on the passenger side of the body. Mine has a control flap that let's you direct the heat to either the passengers feet or over to the drivers. It's a square heating coil, maybe 8"x8" motor on top with a shroud covering it. I'd attach a pic, but the steps needed to attach a pic are maddening...
-
In order to post a pic it must be hosted someplace, like Photobucket.
Larry
-
Thanks all...when I get off this Tub I will try and post some pics...
-
didnt get to the camera, but disassembled unit and found out its a... Mobile products model 901 H....must be after market..although mounting bracket seems too be made for firewall bolt pattern...two fans and a pretty good sized heat exchanger on it...