My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: Matto on April 24, 2011, 07:43:38 AM

Title: Draw Bar
Post by: Matto on April 24, 2011, 07:43:38 AM

Does anyone know if you can interchange a draw bar from a CJ3A with one from a 2A or early CJ3B,CJ5? I'm looking at a 54 3B that the draw bar has been modified.
Thanks

Title: Re: Draw Bar
Post by: Bob W on April 24, 2011, 07:47:53 AM

CJ-2A, CJ-3A and CJ-3B drawbars should interchange although there are a few small differences over the years.

Title: Re: Draw Bar
Post by: jamesr on April 24, 2011, 10:46:22 AM

I installed a draw bar from a CJ5, on my 3A, and had to shorten some of the brackets.  It was no big deal.  Fit fine then.  JIm

Title: Re: Draw Bar
Post by: Matto on April 26, 2011, 09:12:29 PM

Thanks, I was hoping this would be simple. :)