My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: bayo500 on April 09, 2011, 01:18:10 AM

Title: Companion flange leaking
Post by: bayo500 on April 09, 2011, 01:18:10 AM

This is a carry over from the rants page...I'm just about to rip the flange off the back of the transfer box as its still leaking after fitting a speedie sleeve, should i have put some sealant on the splines to stop a by pass type leak along those splines  ?

Title: Re: Companion flange leaking
Post by: bayo500 on April 09, 2011, 03:45:24 AM

http://img28.imageshack.us/img28/3906/1011883.jpg

Just took the shaft out and a 1/4 of a cup of t/case oil dropped out of this area, i need to put RTV sealer on the splines and on the four bolts, Duh...  

 Those old posts are always a wealth of knowledge...

Thanks Doug from 2010...