My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: mderick on April 04, 2011, 01:41:28 PM

Title: CJ3a Window Vent
Post by: mderick on April 04, 2011, 01:41:28 PM

Hi All:

new to the board so hoping someone can help.
I have a 3a window, missing the centre vent. I am going to buy a vent plate with the spring etc, but am not sure how this all would go together. I get the feeling something is missing from the window frame.
would anyone have a clear picture depicting how this would go together and work?

thanks in advance

Title: Re: CJ3a Window Vent
Post by: rocketeer on April 04, 2011, 05:35:21 PM

Welcome,

Click on the link and see if that's the info you need.

http://cj3apage.proboards.com/index.cgi?board=Tech&action=display&thread=1225

Larry

Title: Re: CJ3a Window Vent
Post by: mud pie on April 04, 2011, 11:17:22 PM

My dad busted the loop off the windshield frame to make room for the rifle holder (go figure...)  ::)

Title: Re: CJ3a Window Vent
Post by: mderick on April 05, 2011, 12:37:24 PM

Thanks so much, This is exactly what I was looking for.
I think that I must have an M38 window frame. may have to start looking into modifying it.

again, thanks guys

Sorry to hear about what your dad did.