My Willys 3A and 3B Community
3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: brotherdavid on February 05, 2011, 11:53:52 AM
-
today i took my head light buckets apart as i am going to sandblast, prime and paint them. i noticed on the inner bucket ( where you adjust headlight aim ) that there is some type of grease on the backside 3 pivot points to adjust headlight aim. the grease seams very dry ( maybe from 58 plus years )
i guess i'm wondering if this is for easier adjustment of headlight aim, is it neccesary, and if so what is everybody using for grease?
both headlight buckets had this ( grease ) and yes the buckets are a chocholate brown color like BOB W. explains in his cj3a book.
P.S. if you haven't ordered BOB W.'s cj-3A info book, I suggest you get one. It has lots of information and photos . it is a VERY GOOD READ.
-
I will suggest white Lubriplate grease because it doesn't melt and run.
-
P.S. if you haven't ordered BOB W.'s cj-3A info book, I suggest you get one. It has lots of information and photos . it is a VERY GOOD READ.
Thanks!!!! :)