My Willys 3A and 3B Community

TECH FAQ SECTIONS => Gearboxes and axles => Topic started by: RandyA on March 13, 2017, 07:39:31 PM

Title: T 90 clutch
Post by: RandyA on March 13, 2017, 07:39:31 PM

Gents...trying to replace my cutch in a 52 CJ3A...I have a V6 Buick even fire in there and am having issues ordering a clutch kit...any help would be appreciated... Gonna run GL 1 fluid...I know theres been Question about that as well... I got one kit from Car Quest and the pressure plate was off, bolt holes, also the pilot bearing was wrong... Any part numbers and supply guys will help... God Bless...Randy A.

Title: Re: T 90 clutch
Post by: RICKG on March 14, 2017, 05:14:57 PM

I've got an oddfire 225 on the stand. Clutch disc and pressure plate are on the shelf. I may be able to pull some numbers off of em.

Title: Re: T 90 clutch
Post by: RandyA on March 14, 2017, 10:59:55 PM

That would help a lot... I have a 9 1/8 inch flywheel surface and pressure plate... ordered one but bolt holes wouldn't align... Thanks...

Title: Re: T 90 clutch
Post by: RICKG on March 15, 2017, 09:10:16 PM

Sorry Randy I can't help ya, what I've got is 10-1/2"..

Title: Re: T 90 clutch
Post by: RandyA on March 16, 2017, 11:08:42 PM

Thanks for trying...God Bless...Randy A.