My Willys 3A and 3B Community

TECH FAQ SECTIONS => Gearboxes and axles => Topic started by: PhilipS on January 14, 2017, 04:23:01 PM

Title: torque specs
Post by: PhilipS on January 14, 2017, 04:23:01 PM

I am replacing the clutch Parts and am trying to find the torque specs for the pressure plate bolts, nothing seems to have them listed. any help out there?

Title: Re: torque specs
Post by: athawk11 on January 15, 2017, 01:07:03 AM

Hi Philip,
Later versions of the manual show 12-17 ft lbs. If memory serves, I settled on 15 ft lbs.

Hawk

Title: Re: torque specs
Post by: 1955CJ-5 on January 15, 2017, 01:38:01 PM

Here is a general torque table based on the size,thread and grade of bolt..

https://www.boltdepot.com/fastener-information/bolts/US-Recommended-Torque.aspx

Title: Re: torque specs
Post by: bverboy on March 05, 2017, 08:28:46 AM

got any torque specs on the pinion shaft and parking brake center nut on transfer case or the nut in the transmission?