My Willys 3A and 3B Community

TECH FAQ SECTIONS => Gearboxes and axles => Topic started by: lbpa18 on February 25, 2016, 11:53:49 AM

Title: PTO winch drivelines
Post by: lbpa18 on February 25, 2016, 11:53:49 AM

Im sure its on here somewhere but a search has thus far eluded me. I am trying to fabricate the driveshafts for a Ramsey front-mounted winch from a Koenig PTO gearbox. I hate to have to reinvent fire if someone here already has the dimensions of the shafts (lengths as well as diameter) or a list of what is required. I have lots of file photos of the pieces but no specs. Any help from you knowledgable folks would be most appreciated.
Thx. Lew

Title: Re: PTO winch drivelines
Post by: garage gnome on February 25, 2016, 08:48:23 PM

I went to tractor supply and got one.

Here's some picture of how I ran my PTO shaft. I went up the passenger side. If you read through the next few pages, you'll see how I modified the body to work with it.

The original PTO shaft had a few u joint in it to bend around various obstacles from going up the driver's side.

http://www.cj3apage.com/cgi-bin/3Ayabb26/YaBB.pl?num=1364006201/60