My Willys 3A and 3B Community
TECH FAQ SECTIONS => Engine compartment => Topic started by: BillT on November 06, 2018, 06:07:49 PM
-
Found this in the oil pan of a �52 CJ3A L134 engine while cleaning it today. Don�t want to put the pan back on until I can id it.
Any ideas?
Looks like there may have been a lip on one end of the oblong hole.[reason]Add info[/reason]
-
One of my jeeps has a baffle on the dipstick...I'm looking for a picture....
Check the dipstick and see if the tab is still there....about 1/3 of the way down from the cap...
-
I sure hope you are right. I will look tomorrow, also I have a m38a1 with a �65 f head engine, I�ll look there also. Thanks for the info.
-
Here you go....looks pretty close to me!
-
You da man 1955CJ5. I was thinking it looked familiar but I didn�t have a clue where it came from. I don�t think it is on my dipstick, I�ll braze it back on tomorrow.
Thanks again!
-
Glad to help!
I think I posted this some time ago and very few had ever seen one...
Maybe they shoulda looked in the oil pan:)
The 3a's is missing, but it has a tag on the dipstick..that is the CJ-5 dipstick in the picture....
Randy
-
Kind of hard to understand why Willys thought that was a necessary part for the dipstick.
-
Maybe it keeps the dipstick off the crankshaft throws.
-
The oil filler tube is part of the PCV system. It regulates air flow.
-
Ok, now we know.
thanks Scoutpilot
-
The baffle is missing on both my dipsticks but the tab is evident. It wouldn't be hard top make up.. Measurements??
-
Already have the baffle brazed back on. With it off it would have been a good time to make a pattern for other folks. I will get a measurement and post it.
-
I made one from an appropriat sized frost plug and brazed it to the dipstick!...
Lee ;)