My Willys 3A and 3B Community

TECH FAQ SECTIONS => Chassis, brakes and suspension. => Topic started by: RandyA on June 11, 2018, 10:46:43 AM

Title: Drag Link
Post by: RandyA on June 11, 2018, 10:46:43 AM

Gents... Me again... When adjusting the drag link... Manual says run down end screw until you feel resistance, then back off half a turn... Should the springs have any compression in this? Or just until you feel the resistance at first... Thanks all... You guys make this a lot easier.. Randy A.

Title: Re: Drag Link
Post by: aboyandhisdog on June 11, 2018, 11:12:27 AM

I do it as you have described and not had any issues.  Also, you might back the cap out before you add grease and then make your adjustment.  Lets a little more grease get in there.