My Willys 3A and 3B Community
3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: CJPilot on April 14, 2016, 07:17:54 AM
-
I had to replace my brake light switch. It was a new one but as I tried to adjust the switch to fit the harness butt connectors it broke. After a little research I decided to go with the Crown Automotive P/N J0647801. When it showed up the tag said it was made in the USA. The fit to the harness butt connectors did not need to be adjusted and it installed just fine. Only time will tell if it's going to work but at least it was supposedly made here.