My Willys 3A and 3B Community

TECH FAQ SECTIONS => BODY and trim => Topic started by: stony on June 04, 2019, 02:34:24 AM

Title: Governor control hole in dash.
Post by: stony on June 04, 2019, 02:34:24 AM

I think this is one for Bob.  My early CJ3A has an apparently factory hole for the governor control.  Was this a feature on all 3As or was it not on later models.  Mine is a very early 49. 

Title: Re: Governor control hole in dash.
Post by: Bob W on June 05, 2019, 08:10:07 PM

All CJ-3As had provision for the governor control.

Title: Re: Governor control hole in dash.
Post by: Mark W. on June 09, 2019, 11:22:21 AM

My 48 Willys made tub has that feature. Well it did. Dad smashed it flat when he wanted that area to mount his Spartan push button turn signal switch. SO when I did my body work that got plugged and smoothed over. My Wiper switch is now going in that area.

Title: Re: Governor control hole in dash.
Post by: steves on July 03, 2019, 01:36:03 PM

Coincidence!  I was just going to post a pix today to try to discover the purpose of that switch.  The previous owner of my CJ3A used it to operate a small fan mounted on the steering column.  I have never used it.