My Willys 3A and 3B Community
TECH FAQ SECTIONS => BODY and trim => Topic started by: stony on May 19, 2019, 05:29:47 PM
-
Hey folks, starting another project, I am redoing my seats and even though I think my seat covers ( what�s left of them) are original, but want to make sure. Gray seems to be considered correct, but mine are red, and am wondering if this is a stock color. Right now I am planning on building a set of springs to match my rusty ones, and trying my hand at sewing some covers. I have enough pieces to make a decent pattern. Yeah I know I could buy them, but that is too easy. Anyway here is my current seat back.
-
Hi. Did not reply to your post. Yes I am sure red was stock. My jeep has Luzon red seat. Still original. It comes back from the shop this weekend and I can try and get some photos.
Glen
Ps have you figured out the seat patterns, I printed them out but I am having a hard time understanding them.
-
Yes pretty much. I have my original seat back. It has a little pocket sewn into the bottom to hold the springs. I am going to try to make a pattern. I have the sides to the bottom, but the seat top should be pretty easy to figure out. The stuff to build my springs is on the way, and I am getting a sewing machine for my covers. My summer project.
-
Hey Stony,
Pretty sure Bob W's book describes "Barcelona Red" as one of the vinyl seat cover colors.
I thought the same about buying seat covers...I wanted to make them myself, like most other things I've done on my Jeep. I started to look for a craigslist sewing machine and my wife said: "how much just to buy the seat covers?". I told her $100 per seat and she rolled her eyes and said "Just go buy 'em". So I did, from Walck's, and I was very pleased with the quality. I used foam (did that myself haha) because my springs are just too far gone. The seats came out looking very nice....
I'll update my "build" thread soon with some pictures. Just wanted to point out that after all was said and done, it was one thing I was happy to save time on rather than do it myself.
But I'm looking forward to seeing how you come along on your set....Good luck!
-
Yeah Dave, I considered Walcks covers, but decided to try my own. Might break even, found a Singer 201-2 for $100 (1953) we�ll see how it works out. Starting a seat spring thread.
-
A vital part of my seat project came today. 1953 Singer 201-2. Yeah I�m a glutton for punishment!
-
So my seat project rolls along, and am trying to figure out how to do stuff.� My red marine vinyl (Naugahyde Universal) came today, so it was time to test my sewing machine.� My covers will look stock, but with some improvements like reinforced French seams, so it was time to see if I could do it.� I�m happy to say that the old Singer sews vinyl really well.� My first try at a French seam, pretty slick[ch128512]. I kinda like the contrasting colors!