My Willys 3A and 3B Community
Rambling, Malarky, Rants, Etc. => Willys photo and story threads... => Topic started by: ranchhopper on March 07, 2013, 04:22:46 PM
-
Drove out to iowa this morning and picked up my 49 willys looks real good only place I see any filler is on the cowl but a trip to the media blaster to have the whole tub done will show me the hopefully few surprises I will have to fix. Came with the soft top and a hard top I dont know if its a real willys hard top or something someone fabbed up. Now I am going to restore it and paint it up as a WWII military jeep the MBs are way over my budget so this one will do nicely. I will be looking for a set of stock wheels for it I figure by the time I sell off the soft top, hard top and wheels and tires it should help.
-
Heres a picture of the hard top is this a stock hard top?
-
WIth the varying rivet spacing and those small windows, I would tend to think a well built homemade one. Does it have any doors ?
-
This is the only door its a full size window hinged at the top the rivits are not pop rivits either they are solid.
-
Here is another pic from the back the paint has come off in places but no holes.
-
I still am thinking homemade...No side doors? I don't see any of the hardware that Sears or the other hardtop suppliers would normally use, and those window sizes are not the usual at all. It is interesting there is such a large back window used when the side window are so small.
Some of those old timers use solid rivets and bucking tools to set them...I have a jeep tub around here that looks like something out of Mad Max due to that method of repairs..Pop rivets didn't really come into general use from what I understand until the 60's, maybe a little earlier. But the quality level acheived by many of the home builders of tops can surprise you. Back then some of the plans in Mechanix Illustrated, etc were just incredible...really complex things. I remember a motorized jeep plan I saw recently that had been published in the 40's...It was a very complicated project requiring a small machine and welding shop, along with woodwork and sheet metal fabbing. When guys didn't have the computer games and TV to keep them busy they accomplished some amazing stuff.
-
There certainly was a lot of work that went into building this.
-
Looks nice.
Show us lots of pictures as you transform it.
And have fun.
-
I just noticed those windshield grab bars..Do they show any signs of ever having been chromed? I'm wondering if you have some DJ mixed in with 3A.. then again the vent seems to be bolted shut like a M 38.
-
I just noticed those windshield grab bars..Do they show any signs of ever having been chromed? �I'm wondering if you have some DJ mixed in with 3A.. then again the vent seems to be bolted shut like a M 38.
WHOA!! I see fender strap brackets and the smaller parking lights....Does this tub have a tailgate??? You do know what rare jeep model used those straps, don't ya? Think Pink.....
MORE PICTURES!!!! PLEEEEZE!!
-
That is a later grill too.
-
WHOA!! I see fender strap brackets ...
Are you talking about the footman loops at the back of the flat of the fender?
And, yeah, that's definitely an M38 windshield.
-
I will get more pics today Im going to start taking the front clip off so it can be taken in to the media blaster Im sure there is a lot of things (wrong) or incorrect on this jeep the color Im going to paint it will be somewhat incorrect too. It will be a WWII era semi gloss olive drab I was building a 39 packard into a staff car and I bought the two gallons of paint for it but a local car guy came along and offered me good money for it so it went down the road with him.
-
WHOA!! I see fender strap brackets ...
Are you talking about the footman loops at the back of the flat of the fender?
And, yeah, that's definitely an M38 windshield.
Yes, the wide footman loops were used for the straps that went from the fenders to the windshield on the SURREY. I could use a set of those wide loops. But I want to know if there are more Surrey featues on that jeep. Like a Cj5 style gage, weird parking brake, No tailgate, no toolbox,56337 serial no prefix, etc.
-
Well spent some of today disassembling my jeep I believe it has been retubbed probably aftermarket thats why the lack of rust on the underside and no eaten through hat channel the whole underside and firewall has been undercoated at one time. It seems the jeep had a bit of a body lift when the larger tires were added its progressive about 1 1/2 inches under the core support to stock thickness on the rear body mount. I hadnt noticed before but the hood has no willys logo stamped into it and the windshield has military style channels up the sides and along the top over the windshield for the soft top to slide into. Im pretty happy with it it runs and drives good and for the 2800 dollars I paid for it I couldnt have even bought the tub for that I took lots of pics but dont know how to load more than one at a time.
-
Keep your eyes peeled for some pastel paint underneath the red....That dash may have been modified to take the earlier instruments, and you seem to have a toolbox as well, but everything else is pointing to one of these
http://www.film.queensu.ca/CJ3B/Siblings/SurreyGala.html
Check it out...
-
Could be the grab handles on the windshield are chrome underneath the paint if its any of those colors it could be the blue because the gas tank has a small leak and loosened some of the paint on the driverside floorboard and I thought I saw some blue paint.One other little detail is the rear mounted gas tank its in some of the pictures I took and its in some of the dispatcher jeep pics I have seen.
-
And the mystery deepens just took this picture of the driver side floorboard sure looks like blue paint to me I also thought it strange when I removed the tires and rims no left handed threaded studs on the driver side like the axles on my parts jeep are.
-
After looking over the surry brochure I think this is another feature of the surry tub.
-
Definitely curiouser and curiouser.....Internet going buggy tonight due to storms.....but it looks like you are doing fine on the pix..I just downloaded them and am going to put them in PB. Lots of possible pink spots of paint in chipped areas from what I see.. For one check out the windshield frame in front of the steering wheel.
That blue is not a Surrey blue...But....there may be some other color yet underneath it. .
Can you see any welding work done to the dash or the tool box that looks liek it was done after it left the factory??
Is there a stamped in number on the passenger side frame rail top surface behind the motor mount and in front of the tub? �(Or is there a 56337-xxxxx serial number plate on the right firewall?_)
-
Today I ran my fingers behind the dash looking for filled screw holes but didnt find any so there was never a plate affixed to the dash and the fuel filler on the driver side was added later you can see it was welded inalso it has longer frame horns than the parts jeep I have.There is no numbers I can find on the frame rails it has a CJ-3A tag on the firewall probably added by someone through the years but that is all on the firewall.
-
It might be me but look at the wrn thru paint spots in this pic of the windshield frams...Pink??
http://i1296.photobucket.com/albums/ag3/FBilljeeps/100_3941_zpse95f031f.jpg
(http://i1296.photobucket.com/albums/ag3/FBilljeeps/100_3941_zpse95f031f.jpg)
Also see the steering column outer tube has been rotated and there is the Surry /DJ column shifter upper bracket.
-
You also still have the DJ rear tank, right rear filler, reap pnel brace from the floor, and teh DJ parking brake handle is still in the dash , withe a 3A handle too.. I think the tub was a Surrey tub at one point.
Here is a link to my Photobucket library where I put the rest of your pix.
http://s1296.beta.photobucket.com/user/FBilljeeps/library/#/user/FBilljeeps/library/?&_suid=136280299448408797685452690691
Here you can see the DJ carb...It has a paper element filter, but it is aftermarket. The oil bath was an optional filter on the DJ.
(http://i1296.photobucket.com/albums/ag3/FBilljeeps/100_3942_zps4567c7a6.jpg)
Those body spacers are strange.....ANd I can't tell what is going on with the frame to need them. Bottom mounted Cj2A stule radiator too. (also earlier 3A) Interesting radiator brace rod modification.
-
The reason to raise the body in the front is to clear the oversize tires to be able to steer without rubbing the fenders and when they had the 2BBL carb on it I think they thought by raising the front of the body they could get it to fit under the hood eventually they had to cut the hole in the hood anyways. I am also puzzled by the axles being different than the ones on my parts jeep these are all right hand threaded studs where my other jeep had left hand studs on the driver side maybe they swapped them out while doing a brake job years ago.
-
After looking over the surry brochure I think this is another feature of the surry tub.
It would be educational to carefully remove this part and see what color is underneath.
On your right handed stud issue....I would bet someone broke a couple of left handed ones in the past aand they decided to replace them with "normal" studs. It is pretty common for guys to break off a stud or two before they figure it out, maybe this guy didn't figure it out until it was too late.
Here's more of your pics...
(http://i1296.photobucket.com/albums/ag3/FBilljeeps/100_3950_zps085606c7.jpg)
(http://i1296.photobucket.com/albums/ag3/FBilljeeps/100_3937_zps598b5899.jpg)
(http://i1296.photobucket.com/albums/ag3/FBilljeeps/100_3938_zpsa09a2ace.jpg)
(http://i1296.photobucket.com/albums/ag3/FBilljeeps/100_3939_zpsfe091bd2.jpg)
(http://i1296.photobucket.com/albums/ag3/FBilljeeps/100_3940_zpsa8c4d859.jpg)
-
Thanks Im going to take the front clip off today and see what other surprises await thanks for the work you did with the pics I think the frame was a surrey frame too because of the long frame horns.
-
The 3A frame and a Surrey frame are almost identical except for the drawbar/ rear gast tank changes.
TO mount the chrome rear bumper they used a z shaped piece of bar stock, and the front bumpers were mounted directly to the frame rail by a bolt thru the face fo the bumper.
I tried to post a bunch more but Photobreakit was not cooperating.
The front gusset mounts you have need to be eliminated for any serious wheeling. HAve you seen the valve spring/hocky puck body mounts Nate did? You need to let the body move a little when teh frame flexes.
-
(http://i1296.photobucket.com/albums/ag3/FBilljeeps/th_100_3945_zps627043ff.jpg) (http://s1296.beta.photobucket.com/user/FBilljeeps/media/100_3945_zps627043ff.jpg.html)
(http://i1296.photobucket.com/albums/ag3/FBilljeeps/th_100_3946_zps8a042bcb.jpg) (http://s1296.beta.photobucket.com/user/FBilljeeps/media/100_3946_zps8a042bcb.jpg.html)
(http://i1296.photobucket.com/albums/ag3/FBilljeeps/th_100_3947_zps610bc3d5.jpg) (http://s1296.beta.photobucket.com/user/FBilljeeps/media/100_3947_zps610bc3d5.jpg.html)
You have the same parking lights as used on my 60 DJ's....it is the same light as used on early CJ5, not a 3A light when you try to get parts for it. Glass lensed, bolts are very easy to break off. Start soaking things with PB blaster a week before you try to change a bulb.
-
With all the modifications that went on, besides the surrey specific grab handles and footman loops, we need to sand the paint down to see what the bottom layers are to definitely know if that is a Surrey tub.
Let me be the first to say if you decide not to restore it as a Surrey (expensive!!) please save the Surrey components for a surrey owner. I really could use those footman loops and the grab handles if they prove to be Surrey parts. DO NOT TOSS ANYTHING yet until you have checkes with us DJ guys to see if it is a special part. They used some goofy and cheap looking brackets here and there that look like someone visited the local hardware store to buy parts..
I will post a link to this over on the DIspatcher board of Derek Redmond's CJ3B site. BA, Colin , Glennstin and Oldtime are all really knowledgeable guys who will be interested iin your new jeep!!
-
Thanks for the advise it wont be restored as a surrey the grab handles are going to come off as well as the loops on the front fenders Maybe the rear gas tank and filler if you want them PM me an offer Im not greedy just reinvesting the money back into the jeep.
-
Got the front clip off the jeep today I found the original color I thought it was blue.
-
That's Cerulean blue, a Surrey color. Ad your engine number could easily have been in a Surrey OR a 3A.
-
Got this picture of the longer frame horns they are much longer than my 3A parts jeep they have not been added to you can see where they end under the 3/4 inch steel blocks.
-
That's Cerulean blue, a Surrey color. Ad your engine number could easily have been in a Surrey OR a 3A.
What is the engine serial number?
-
3J167733 stamped behind the water pump.
-
3J167733 stamped behind the water pump.
That would be from about 1960, just after the timing gear oil jet changed from 0.070" to 0.040".
-
Everything about your new Jeep screams Surrey except for.... M-38 windshield frame, 4WD, 5 gauge cluster and the radiator.
-
I took a closer look at the dash today it looks like they enlarged the speedometer hole and went with a bigger one I thought the surrey had four lug wheels so the axles must be from a different donor vehicle..
-
Surreys were ALL 2WD with a different 3 speed than the T 90.. (t86 I think) The original front axle was a beam type, and the rear was a smaller Dana, and as you said, 4 lug. However, everything from a 4WD jeep would bolt up to the engine and springs with minimal modification. MOST �but not all converted DJ's still are on the original DJ chassis, which has a rear gas tank. We have seen ONE 4WD factory jeep with Surrey colors and �upholstery....I forget right now but I think it was a CJ3B.....
I've got a 60 DJ with a tailgate here at the house, with 4WD and a V6 and T-90 from a Cj5 in it. It looks like it was built that way. Too bad it was left outside in Ohio too long as the engine is seized up.
The nice thing about your tub is the lack of tailgate makes it a lot stronger ...but you have a toolbox and can use stock 3A seating, which is a lot easier to find than the dispatcher seats...and again, it is stronger.
To me your frame horns look correct for DJ OR 3A.. The black steel bumper covers the first two inches of frame when you install it, so it makes the frame look a bit different when the bumper is off.
You have the makings of a real nice jeep there.
-
Its pretty nice no doubt the front clip unbolted perfect the fenders, grille and hood are all rust free we will see what surprises I get when they come back from the media blaster.
-
We have seen ONE 4WD factory jeep with Surrey colors and �upholstery....I forget right now but I think it was a CJ3B.....
I forgot about that possibility, perhaps it is factory 4WD. The date codes on the axles, transmission and transfer case will pretty much tell the story.
-
I will be able to easily get all that when the tub is off im going to bring the chassis to work and steam clean it and pressure wash it down and prep it for paint. It doesnt make much sense the steering column should be surrey if the jeep was just retubbed with a surry tub but lack of a serial number in the frame is a bit strange too. I was told by the previous owner for him to get it titled he had to get a state trooper out to verify a vin on the frame but finding none they titled it as a 49 he was told that year they didnt number the frame.
-
Willys began to stamp frames with the sequence portion of the VIN somewhere around 1954. Here is a photo from The CJ-3B Page showing the location....
(http://www.film.queensu.ca/cj3b/Photos/FrameNumbers/Carter66488.jpg)
-
OK I will look again it should be right over the spring hangar maybe I didnt look far enough back if there is a number there its going to give me some titling headaches unless I dont say anything about it.
-
I wouldn't worry about changing the title for some number stamped on the frame.
-
Made good progress today the tub has been unbolted and ready to go one last thing to do is pull the steering gear and get the column out all electric has been removed. The tool box is an add on the pitted metal doesnt match the smooth unrusted metal of the tub and its easy to tell it was welded in at a later date. The driver side gas tank was added too it had a spot where it rubbed through on a raised piece of metal it will go to the radiator shop tomorrow and be repaired to be sold off its spotless inside too. I am going to stick with the rear tank I am going to run it to the radiator shop as well and have it boiled out and checked for leaks tomorrow looks like the gauge holes were cut into the dash with a hole saw dont know if the dash was replaced or not looks to be factory the welds match up with the rest of the tub. Sold off the wheels and tires today and the roll bar I have a line on four stock wheels with tires already on them so I am going to buy them and I will have plenty left over for the media blaster.