My Willys 3A and 3B Community

Rambling, Malarky, Rants, Etc. => Rambling, Malarky, Rants, Etc... => Topic started by: F Bill on November 10, 2013, 02:41:50 PM

Title: Need a roll arpound workstand for your tub?
Post by: F Bill on November 10, 2013, 02:41:50 PM

Here's a YouTube video on how to build a basic roll around workstation. Other than two sheets of ply or OSB most of it can be built with used materials.  Build it short, it will be a tub cart. Build it at workbench height, it will be a great mobile workbench. I think I would gusset the bottom corners with 3/4 ply myself before I added the casters.. but you get the idea.

http://www.youtube.com/watch?v=R6ZDjbEs1uA

If you already are a carpenter, you probably have built one already!  :D

Title: Re: Need a roll arpound workstand for your tub?
Post by: SteveW on November 10, 2013, 10:47:37 PM

I made a rolling station for my tub early on and it worked well

(http://www.surfacezero.com/g503/data/500/medium/P1000230.JPG)

It was short just for the tub put very handy for most of the tub work

(http://www.surfacezero.com/g503/data/500/medium/P1000374.JPG)

I converted it into a tub turner device later on when I mad another temporary work shop in the back yard for some body work and painting