My Willys 3A and 3B Community
Rambling, Malarky, Rants, Etc. => Rambling, Malarky, Rants, Etc... => Topic started by: garage gnome on April 08, 2013, 07:52:45 AM
-
My dad found this on Craigslist. It was converted to single phase already. I have a project in mind for it, a single valve engine to go with my home built engine.
(http://i748.photobucket.com/albums/xx125/willyscjmj/6B693FE4-374F-4787-83D1-6235867B1703-11687-00001CB03E2113F7.jpg)
-
Wow, A single phase Anvil.. Most of those old anvils are three phase, you got lucky! ;D
But seriously... Bridgeport clone? Any tooling? I need to send you something to mill today....I got a quick attach tool post from my Atlas and I need to get the T nut milled to fit the compound t slot.
Have you got all the catalogs from the places like Little machine shop, Tools 4 cheap, CDC tooling? Some even sell raw castings for engine projects. Way too easy to spend a lot of $$ on tooling.
-
Yeah, those single phase anvils are hard to find, just like muffler bearings! ;D
It is a real Bridgeport. It came will all the collets and some end mills. That is about it. We will have to get some of those clamps for it and a few other tools.
I'm familiar with msc and McMaster Carr stuff. That's it.
-
I am very jealous. :o
-
Nate, that will open up almost as much potential as a lathe. Just makes some things that are really problematic really simple. As far as tooling, MSC/Enco is about as cheap as it gets.
I have more than a life time's worth of end mills. One of the neighbors that owned a manufacturing plant in town had a garage sale about 5 years ago and I got 25-30 lbs of sharpened end mills-about every size/configuration there is and most are Cleveland. Sorry-don't want to get rid of them yet.
-
That's ok John. We'll just get our own tooling eventually. We're still learning. I know some basic stuff about it. We'll get there. ;)