My Willys 3A and 3B Community
Rambling, Malarky, Rants, Etc. => Rambling, Malarky, Rants, Etc... => Topic started by: Comanche_County on March 24, 2013, 12:04:31 AM
-
http://youtu.be/QUSQoI_5n6g
hmm,,,GPW with a 3A windshield???... a cliche' engine swap, bad truss, bad 4-link, and an even worse song...a travesty to real country and western music. � I feel sorry for this Jeep. �Its been enslaved and whooped so hard by bubba that can never be rescued. �They took it way too far.
I bet a stock Jeep would perform better than this jalopy anyway. �With that driveshaft angle and that engine, it'll puke out more u-joints differentials than all the drunken college kids on spring break at Panama City.
I blame this on Nashville.
-
Well, then I committed bubbafication too... My stock 2A frame was crap, so I built a new one and did coil springs and kept the stock axles. It had a 70's repro body too. I'm running a 225 v6, T18 and D18, so is that a cliche too? Funny you called that a jalopy because I named mine The Jalopy. I guess the difference is, mine isn't 4 feet in the air and isn't put to a bad country song. �;D
(http://i748.photobucket.com/albums/xx125/willyscjmj/The%20Jalopy/DSCN0237.jpg)
(http://i748.photobucket.com/albums/xx125/willyscjmj/The%20Jalopy/DSCN0228.jpg)
-
Yikes,
Just listening to that music would drive me to do that.
-
To each his own. �It would appear that tub was a LONG way from pristine with gobs of bondo/rust. �
I am not sure what he is actually using for axles-look stock-but at least some of that appears nicely done. �Exceptions are the D25, which trussed or not, �probably will not have a long life with a 5.3 and the front spring axle mounts look just scarry. �If the D44 still has 2 piece axles, those will also have a short life and the driveshaft angles are not something I would be running.
Curious how much length was added to the wheelbase as you wouldn't have any rear driveshaft with 80". �And I even think the 3A windshield is an improvement since the rest of it is making absolutely no pretense of even looking stock.
And I grew up on a ranch listening to country music and am still on a ranch-
And I still hate that music ;D
-
Sorry Gnome, no offense intended...I've been under the weather lately...and was forced to do yard work all day yesterday between downpours, guess I was just tired, grumpy and soaking wet last night when I saw that. �It goes without saying that your Jalopy is a well built masterpiece. I totally forgot you named yours that...sorry mate. :)
-
That was a pretty well trashed GPW to begin with but those driveshaft angles do look scary.
Nate... would yours work on road or would you need to make it handle better on smooth pavement at speed to be road drivable?
I had my sound turned off so the music was just fine. ;D
-
I would have to add sway bars and I would be good to go. Right now, it has a pretty scary body roll around corners... But I don't want to put it on the road. Low speed thrill ride is just fine with me. 8-)
-
Since you can buy almost anything for the CJ2 and 3 I don't see what it hurts to make one the way you want it. If building that Jeep blows his dress up then good for him.
I too have a bad feeling about the angle of the drive shaft.
-
http://treasure.craigslist.org/rvs/3668045710.html
Here's �another rig spotted on CL today.
-
ROFLMAO, ;D He should have put the engine on the top level with chain drive to the bottom. He could drive through much deeper water that way.
-
Sorry Gnome, no offense intended...I've been under the weather lately...and was forced to do yard work all day yesterday between downpours, guess I was just tired, grumpy and soaking wet last night when I saw that. �It goes without saying that your Jalopy is a well built masterpiece. I totally forgot you named yours that...sorry mate. :)
No offense taken. ;) We all have our days. But yes, that GPW could have been restored.
Those swamp nights are pretty common down in the southeastern US. I don't like what they do to the poor jeeps.