My Willys 3A and 3B Community
Rambling, Malarky, Rants, Etc. => Rambling, Malarky, Rants, Etc... => Topic started by: Gunslinger on January 15, 2012, 10:55:31 AM
-
We've talked about this one for some time and I want to thank everyone that contributed to the revival. �Carlsjeep, Rocketeer, aboyandhisdog, athawk, commanche, commando, BobW, F-Bill. �All of you guys and awhole lot more have a seat in this ride, thank you.
Todd
(http://i1089.photobucket.com/albums/i356/banjo19/JeepID017.jpg)
Triple X at Rest
(http://i1089.photobucket.com/albums/i356/banjo19/JeepID015.jpg)
(http://i1089.photobucket.com/albums/i356/banjo19/JeepID013.jpg)
Added a roll bar from a Wrangler, with a storage pack from 4 wheel parts
(http://i1089.photobucket.com/albums/i356/banjo19/JeepID012.jpg)
Dash is pretty much standard, but I like the m38 throttle control better than standard, and I had to upgrade the tattle tale to a 12 v LED
(http://i1089.photobucket.com/albums/i356/banjo19/JeepID011.jpg)
This was cool, made a hand wiper from the extra parts from a broken vaccum wiper, driver side is electric
(http://i1089.photobucket.com/albums/i356/banjo19/JeepID007.jpg)
I found the everdry kit at Oldmoparts.com, my willys came with the metal cups soI thought it should go back on
(http://i1089.photobucket.com/albums/i356/banjo19/JeepID018.jpg)
If you open this up there is a cup holder �;D
(http://i1089.photobucket.com/albums/i356/banjo19/Jeep11-30-11016.jpg)
Full flow Oil Filter system, the Aero quip hoses were for fun
(http://i1089.photobucket.com/albums/i356/banjo19/JeepID001.jpg)
Frontal shot
(http://i1089.photobucket.com/albums/i356/banjo19/EverDrykit001.jpg)
Sun bathing in the front yard �8-)
-
I thought I had loaded the pix not the link,
[size=36]Fixed[/size]
-
Very nice!!!!! :)
-
It looks great, Todd - you have to be happy with how everything turned out. Is the color "Luzon Red"? Your seats look to be in good shape...are you needing canvas to make a top or do you just want to change out the seats to canvas? I'm also really impressed with your oil filter...60 psi with no drop-off...pretty sweet. Now, go take a drive!
-
Gun!! Awesome Willys! That's a great color. What inspired the name "Triple XXX"? I like the way you did the seat belts. It looks like they'll hold you in on some tricky back roads. It really looks built and ready for fun.
Great Work!
Tim
-
Thanks Guys,
That color is from a NAPA book for a 1982 Buick, I added pearl to it ti give it a little lift, I tried to find Luzon Red but the color codes were a bit elusive.
The seats are vinyl covered foam not originals, they are OK for now. I do have a bikini top for it, not shown. I altered a Smitty bilt bikini for a CJ7 to fit. I was thinking about going with a full top, either with the original style or possibly with M38 bows if I can make them fit. We'll see.
Had it out last weekend, man is it fun to drive!!
I named it Triple X because it weemed I had to do everything 3Xs in order to get it right! :o
-
M-38 bows should fit a CJ-3A fine. Just need to get the bracket in the correct location.
There may be an issue with the roll bar and the fit of the bows and top.
-
:) GREAT PHOTOS. THANKS FOR POSTING.
-
Great looking Jeep!!
I have to warn you now..........I'm probably going to steal the cup holder idea ;D
-
You rock Mac, go for!!! I've got a couple of cans if you need one!! ;D
-
:o WOW, that's really nice. You can see there is a lot of time and love in the Jeep and it's time to enjoy it.
-
Hey Gun,
I'm right there with Mac. � I didn't read your captions the first time through. �Totally stealing the cup holder idea. �Got the can already. �
I'm guessing yours is bolted down. �Your Jeep looks built to tear up a hillside. Wouldn't want the drinks flyin around.
What is the gauge for? �Mounted under the dash lip.
Tim
-
Hey Tim
I've pulled that one, it was a secondary Oil Pressure gage, when I was having all the trouble I added a gage and ported it out of the rear cam bearing, 3rd port back. It was an interesting experiment, I found that the Willys dash gage was pretty accurate at 20 psi to 50 psi, but below 10 it was fairly poor. The second gage was a Sunpro, it would read in smaller increments at the lower pressure. After that last build it wan unneccesary, I'm at a solid 50 psi at idle now, so no worries.
Todd
-
Hey Guns, Jeep looks great! We'll be sportin a ammo can before long to. ;D
Matt
-
Very nice Guns, in appreciation for your hard work, I will allow you to marry my first born daughter, you'll have to wait 9 years though. :)
-
CC, I'm humbled, but you don't get the jeep !!! ;D