My Willys 3A and 3B Community

Your Projects => Your CJ-3A Project => Topic started by: James P on June 16, 2012, 07:07:14 PM

Title: Re: My 3a's Progress report
Post by: James P on June 16, 2012, 07:07:14 PM
Well fired up the Jeep tonight and had to add to the list of things that need some focus.  ;D
Had little bit of a panic when I first rolled it over, I had oil suddenly poring down the side of the engine.
A bit of advice make sure the oil filter canister's top is Tight before firing up the jeep.  ;)

She ran pretty smooth, at least till the fuel drained out of the carb. The current fuel lines have been seriously bubbafied, but I am not to worried about that right now seeing that I am going to be stripping it down completely.



Title: Re: My 3a's Progress report
Post by: F Bill on June 16, 2012, 08:22:48 PM
Quote
Well fired up the Jeep tonight and had to add to the list of things that need some focus. �;D
Had little bit of a panic when I first rolled it over,



What???? don't say rolled it over when you are talking jeeps!! Ya almost gave me a heart attack there.. ;D :o

Congrats on the successful startup.!
Title: Re: My 3a's Progress report
Post by: Comanche_County on June 17, 2012, 10:21:55 AM
Ah, the first golden moment of start up, congrats!
Title: Re: My 3a's Progress report
Post by: James P on June 26, 2012, 05:49:06 PM
Been stripping the jeep down as I have had time and decided to up date my progress and show off some more pics of what I am dealing with on the jeep.
Apparently at some point in the jeep's past, some one decided to "fix" the floor boards and and a couple of other bad sections on the body.
It looks like the preferred material for patches was street signs.


(http://i1167.photobucket.com/albums/q640/Peckhams52/P6250187.jpg)
(http://i1167.photobucket.com/albums/q640/Peckhams52/P6250190.jpg)


The passenger side after I removed the street sign on that side.


(http://i1167.photobucket.com/albums/q640/Peckhams52/P6250186.jpg)


A possible bubba mod, are these jeeps supposed to have a coil spring as well as the flat springs?


(http://i1167.photobucket.com/albums/q640/Peckhams52/P6250188.jpg)



A definite bubba mod, this one actually aggravates me because I now have to cut the thing out and find the supports and the draw bar.


(http://i1167.photobucket.com/albums/q640/Peckhams52/P6250189.jpg)



Also here is an example of the original color any body have an Idea what color I am looking at.


(http://i1167.photobucket.com/albums/q640/Peckhams52/P6250191.jpg)



Right know I have most of the parts off the windshield and have started removing what I can get off. Putting all the small stuff in my shed and hoping to have it stripped down far enough by this winter to get the running systems into the shed for some work this winter.
Title: Re: My 3a's Progress report
Post by: Stich on June 26, 2012, 06:09:28 PM
James, you're a better man than me, tackling a job of that magnitude. Congrats and good luck. I finally found the 3A that I can do the finishing touches on. It won't be a restore but a modded CJ as it has the Buick V6 and stuff like power steering and later model CJ axles and stuff already done. I wanted more of a bit modern willys but keep the looks. �

(http://i205.photobucket.com/albums/bb127/skylark175/49Willys2.jpg)
Title: Re: My 3a's Progress report
Post by: Bob W on June 26, 2012, 07:48:58 PM
Quote
Also here is an example of the original color any body have an Idea what color I am looking at.

I'd say it is Hampshire green.
Title: Re: My 3a's Progress report
Post by: James P on June 26, 2012, 08:01:26 PM
Sorry I meant to do this before I posted the picture. The spot I have circled here seems to be the lowest paint color on various protected and flaking areas.
(http://i1167.photobucket.com/albums/q640/Peckhams52/P6250191-1.jpg)
Title: Re: My 3a's Progress report
Post by: athawk11 on June 28, 2012, 10:33:25 AM
My computer color stinks.

Is that a blue or a green?

Tim
Title: Re: My 3a's Progress report
Post by: James P on June 28, 2012, 06:52:24 PM
Blue
Title: Re: My 3a's Progress report
Post by: Bob W on June 28, 2012, 09:21:31 PM
Hampshire Green can be described as Blueish Green or Greenish Blue depending on the lighting.
Title: Re: My 3a's Progress report
Post by: James P on July 01, 2012, 08:12:08 PM
Started stripping off the sheet metal that was riveted on the passengers side and found what looks to be Normandy blue there.
But IF you tip the hood up and look on the bottom side of that, you find on the lowest layer that it is OD green.

But seeing that the tailgate and hood do not have any stamping My guess is that those two items probably came off an m38.

But then again I have at least 6 different colors on this jeep. 8-)
Title: Re: My 3a's Progress report
Post by: 3aJeeper on July 07, 2012, 10:16:03 AM
Speaking of paint, my 3a had multiple layers of paint too - at least 3 or 4 shades of green (but no OD), some kinda orange-ish color, yellow, black and underneath all that was the original red.
Title: Re: My 3a's Progress report
Post by: athawk11 on July 07, 2012, 10:53:02 AM
Hi James,

If the hood is an original M38, there will be a strange cut out on the passenger side.  This was where an auxillary power connection and fording components would sneak through the hood.    

The M38 tailgate is also easy to spot.  There are additional vertical reinforcements on the interior side.  They are there to support the gas can and spare tire mounts.

If you don't see these things, then the hood and tailgate may be reproductions. Some vendors sell un-Willys-marked replacement hoods and tailgates.  They are a bit less expensive.   They may not be able to reproduce the Willys stamp.  It may be a copyright issue of some sort.

Are you thinking Normandy Blue for your restored paint finish?    I know I don't have a vote, but I haven't seen many Willys done in that color.  

Tim
Title: Re: My 3a's Progress report
Post by: James P on July 07, 2012, 05:35:44 PM
Still out on the color I am going to finish it to but probably will end up being Normandy Blue. Based on what you are saying about the hood probably was repro but with my jeep who knows.   ;D
Title: Re: My 3a's Progress report
Post by: macrisel on July 09, 2012, 11:22:34 AM
Yes!  Go with Normandy Blue!  That is what mine is getting ready to be.  If you need the paint code, let me know because I still have the label from mine when they mixed it.

By the way, if you want to see a beautiful Normandy Blue jeep finished, take a look here under "My Restoration":

http://www.cj-3a.com/

Johnathon did a great job on his and I have been modeling mine after it..
Title: Re: My 3a's Progress report
Post by: toynrnd on July 09, 2012, 01:04:07 PM
It is hard to see if there is a bracket at the top of that coil spring. �If there is, they might be the helper springs used with the Jeep-A-Trench trencher...

(http://i99.photobucket.com/albums/l320/dougs715/Jeep%20A%20Trench/IMG_5242.jpg)

http://www.thecj2apage.com/forums/new_reply_form.asp?Quote=1&PID=33548&PN=1&TR=10&SID=8162041zzbb54b66d647f9b3bcfed7486805556
Title: Re: My 3a's Progress report
Post by: James P on July 09, 2012, 09:43:18 PM
Not sure if that was the intention here on this jeep but with the springs but who knows.

Decided to provide an update pictures wise on were I am at on the jeep. � :)

Currently I am trying to get all the add on paneling off the jeep so I can get at the bolts and such.

(http://i1167.photobucket.com/albums/q640/Peckhams52/P7090006.jpg)


I have a Hadees H 20??? heater.

(http://i1167.photobucket.com/albums/q640/Peckhams52/P7090007.jpg)


The orginal fuel tank needs a serious cleaning so I rigged up a gas tank off a dead lawn mower. This was so I could test the engine and drive train for issues. Thought you guys might get a laugh out of it. �;D


(http://i1167.photobucket.com/albums/q640/Peckhams52/P7090005.jpg)
Title: Re: My 3a's Progress report
Post by: F Bill on July 09, 2012, 09:47:57 PM
That black plug looks like an oily cylinder, which indicates ring problems....You may get it to stop oiling so badly if you run it a while and work it some, or if you give it a Marvel mystery oil or tranny fluid down the spark plug hole soaking....but in most cases it means rebuild time.  If you are pulling the head anyway you will have an excellent chance to inspect the bores and pistons, and see what is up. Finding a large ridge and polished bores that look wavy from excessive wear means it is time for a rebuild. . at minimum I would expect you need a honing and new rings. Max would be boring out and new pistons and rings...

That tub sure is begging for some TLC....what are your plans for it??
Title: Re: My 3a's Progress report
Post by: James P on July 10, 2012, 05:20:13 PM
Current plan for the tub is complete replacement. Plan on having my local body shop guy removing the dash and transferring that to the new tub so I have the correct dash. I have already did a preliminary pricing on the tub through Willies Overland.
Title: Re: My 3a's Progress report
Post by: James P on September 02, 2012, 04:55:00 PM
Was doing some cleaning on the jeep and found a couple of spots that were original paint and it looks like Bob's call on Hamilton green is right.
Title: Re: My 3a's Progress report
Post by: James P on April 27, 2013, 05:55:41 PM
Spent my afternoon today tearing the generator apart and scrubbing the 3 inches of crud off the outside. I was so glad to spend the time out working on the Jeep, I will get some pictures up when I get done cleaning it up, replacing what needs to be replaced and repainting it.  :P By the way a good de-greaser that is safe on your hand for those of us who do not always use the proper PPE every time we go play with the jeep, is Simple Green.
Title: Re: My 3a's Progress report
Post by: athawk11 on May 02, 2013, 10:00:39 AM
Come on James...

'Progress' photos are as fun as 'got er cleaned up' photos. 8-)

I like the Simple Green too.  I also used a consentrated Zep degreaser.  It was on the shelf at Home Depot.  Seemed to work pretty well also.

Tim
Title: Re: My 3a's Progress report
Post by: James P on June 02, 2014, 06:50:55 PM
Back at it after letting things sit for over a year do to various things like work, a cold shed and life.
Finished up the Generator and here is a picture of it done.
(http://i1167.photobucket.com/albums/q640/Peckhams52/IMG_20140602_173507_558_zpsb84fa112.jpg) (http://s1167.photobucket.com/user/Peckhams52/media/IMG_20140602_173507_558_zpsb84fa112.jpg.html)

Valuable lesson that has been mentioned before here that I learned the hard way, take lots of pictures as you take anything apart as you take it apart. Was almost done with assembly and realized that I was not sure where one of the wires went. Took me three agonizing days to figure out the diagrams and get it assembled right.

Was feeling real happy with the final results on the generator and decided to tear into the Starter. This time I am taking lots of pictures.� ;D

Edit: I will say as a note the one mistake I made when painting was I forgot to tape of the oil fillers and the id tag.

Title: Re: My 3a's Progress report
Post by: James P on June 04, 2014, 08:13:30 PM
Been trying to get these pictures posted of the starter before I started into it this week. So here it goes.

(http://i1167.photobucket.com/albums/q640/Peckhams52/Starter%20rebuild/IMG_20140602_173517_272_zpsd50481a2.jpg) (http://s1167.photobucket.com/user/Peckhams52/media/Starter%20rebuild/IMG_20140602_173517_272_zpsd50481a2.jpg.html)

Some sort of Id number or something.
(http://i1167.photobucket.com/albums/q640/Peckhams52/Starter%20rebuild/IMG_20140602_173525_105_zps455b6ac4.jpg) (http://s1167.photobucket.com/user/Peckhams52/media/Starter%20rebuild/IMG_20140602_173525_105_zps455b6ac4.jpg.html)
Title: Re: My 3a's Progress report
Post by: James P on June 04, 2014, 08:21:14 PM
For some reason I am unable to post more than a few pics at time so here is a link to all the pictures I am taking but I will also post some of major ones here so that all can see some of the odd ball stuff, and the progress of major points.
 8-)
<iframe width="480" height="360" src="http://s1167.photobucket.com/user/Peckhams52/embed/slideshow/Starter%20rebuild"></iframe>

One thing I noticed is at some point the PO must have had an issue with the starter or hit some thing high, where it looks like some one beat on the starter and dented this band. Might be hard to see in the photo.

(http://i1167.photobucket.com/albums/q640/Peckhams52/Starter%20rebuild/IMG_20140602_174938_580_zps115d74bc.jpg) (http://s1167.photobucket.com/user/Peckhams52/media/Starter%20rebuild/IMG_20140602_174938_580_zps115d74bc.jpg.html)

Also my starter was at one point red I think, found this when I took the band off.

(http://i1167.photobucket.com/albums/q640/Peckhams52/Starter%20rebuild/IMG_20140602_174741_191_zpsb4264a9d.jpg) (http://s1167.photobucket.com/user/Peckhams52/media/Starter%20rebuild/IMG_20140602_174741_191_zpsb4264a9d.jpg.html)

That is my progress so far dinner got in the way and since then life but the nice thing, for me is I now have heat in the shed so no longer is it a 2 season project.  ;D
Title: Re: My 3a's Progress report
Post by: Bob W on June 04, 2014, 08:57:51 PM
Quote
Some sort of Id number or something.


I'd say the starter was rebuilt on October 6, 1987 and the rebuilder's part number is 3326

http://www.armatureserviceco.com/ShowItem/126111%203326%20PRESTOLITE%20STARTER.aspx
Title: Re: My 3a's Progress report
Post by: James P on June 05, 2014, 08:53:59 PM
That is good to know. Will say I love how simple it is to work on these jeeps with the manual I have it makes thing really easy. Love the fact that if it won't start you track through the starting system, engine rolls over = batter good, Have spark = not ignition system, No fuel situation found.
This really struck home this week when my work car would not start and it was a temperature sensor!!!!!!

Dissembled the starter as far as I dare tonight and got the main casing cleaned up and repainted. It look like all the guts are good and seem to test out okay. So now it is just clean, paint and then reassemble. Did find at least one of the screws have to be replaced do to some one beating on it.

Before and after Pics of the Casing, will still give it a coat or two more before I am done.
Starting point
(http://i1167.photobucket.com/albums/q640/Peckhams52/Starter%20rebuild/721e1e60-d90b-463a-bf8f-1462a0669d1b_zps7065bb91.jpg) (http://s1167.photobucket.com/user/Peckhams52/media/Starter%20rebuild/721e1e60-d90b-463a-bf8f-1462a0669d1b_zps7065bb91.jpg.html)

First coat of paint
http://i1167.photobucket.com/albums/q640/Peckhams52/Starter%20rebuild/IMG_20140605_191544_870_zps59f4d74f.jpg

Sorry about the link but Photo-bucket kept linking me to original size.

Title: Re: My 3a's Progress report
Post by: zooke581 on June 06, 2014, 12:36:44 AM
Two words.  Just Wow!
Title: Re: My 3a's Progress report
Post by: James P on June 23, 2014, 06:00:24 PM
Starter is done. Now just trying to decide what to next attack.
(http://i1167.photobucket.com/albums/q640/Peckhams52/Starter%20rebuild/IMG_20140610_172148_216_zps97649c3c.jpg) (http://s1167.photobucket.com/user/Peckhams52/media/Starter%20rebuild/IMG_20140610_172148_216_zps97649c3c.jpg.html)

Sorry about the blurry pic camera and I where having an argument and I lost.
Title: Re: My 3a's Progress report
Post by: 1955CJ-5 on June 23, 2014, 07:22:47 PM
Three pics max if you use Photobucket unless you delete part of the link...if you attach directly from your computer you can post more pics...use the "choose file" button and the + sign to the left to open more file options...