My Willys 3A and 3B Community
Your Projects => Non-Jeep Projects => Topic started by: Dutch_Jeeper on July 14, 2015, 02:41:25 PM
-
Warning picture heavy
So as i told in my intro i also have a 1969 Alfa Romeo GT 1300 junior. Unfortunatly my HD crashed beyond repair and i lost a lot of pictures. It's a long running restoration project, it sits nice and comfortable in my garage. I'm in no real hurry to finish it. I work on it only when i have some real time to give it the TLC it needs.
Here's how i found it well over about 18 years ago:
(http://i86.photobucket.com/albums/k118/gilibran/Alfa%20Romeo%20Restauratie/Bertone_001.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Alfa%20Romeo%20Restauratie/Bertone_002.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Alfa%20Romeo%20Restauratie/Bertone_0009.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Alfa%20Romeo%20Restauratie/Bertone_0007.jpg)
Next to my old 75 Milano 1.8 turbo, just before i blew the engine on the GT on the track� :D :( :(
(http://i86.photobucket.com/albums/k118/gilibran/Alfa%20Romeo%20Restauratie/Bertone_0013.jpg)
On the track a few laps before the engine blew and sprayed that Porsche i the background with a lot of oil.
(http://i86.photobucket.com/albums/k118/gilibran/Alfa%20Romeo%20Restauratie/desktop_01.jpg)
And how it has been sitting for the last 8 years, progress is slow. Corners are rusted, right rear fender needs to be replaced, but for the rest it is rock solid. I'm in the process of getting it down to the bare metal, taking of the old Tectyle and conserving it in epoxy primer.
(http://i86.photobucket.com/albums/k118/gilibran/Alfa%20Romeo%20Restauratie/Bertone_0004.jpg)
This is about the worst it gets:
(http://i86.photobucket.com/albums/k118/gilibran/Alfa%20Romeo%20Restauratie/Bertone_0051.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Alfa%20Romeo%20Restauratie/Bertone_0052.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Alfa%20Romeo%20Restauratie/Bertone_0054.jpg)
It's not all bad news though on the contrary:
(http://i86.photobucket.com/albums/k118/gilibran/Alfa%20Romeo%20Restauratie/Bertone_0020.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Alfa%20Romeo%20Restauratie/Bertone_0035.jpg)
Inside of the wheel wells
(http://i86.photobucket.com/albums/k118/gilibran/Alfa%20Romeo%20Restauratie/Bertone_0018.jpg)
Painted and protected
(http://i86.photobucket.com/albums/k118/gilibran/Alfa%20Romeo%20Restauratie/Bertone_0044.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Alfa%20Romeo%20Restauratie/Bertone_0048.jpg)
This will take a few more years to finish while working on what is neccesary to keep the CJ3a on the road and in good condition.
If i want to though i can work fast, did this in less then a week :D a 1956 license build Bantam trailer by the Dutch company Polynorm. It was in perfect condition, no rust, no welding needed. Just strip and paint� :D
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0002_zps8ymtzofe.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0003_zpsdriroqys.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0004_zps0jvo9wlg.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0005_zpse9qgphgm.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0006_zpsrsftti8e.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0010_zpsdbdxunz5.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0016_zpszg6rsd19.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0026_zpswghfif8t.jpg)
The only real bad spot of rust� :D :D ;D ;D
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0030_zpssiqouwkg.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0031_zpsbmnlcnod.jpg)
Stripped and painted
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0039_zpslgtwbygl.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0042_zpsye7wrhtt.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0046_zpspwgealzr.jpg)
I love the sandblaster unit i purchased a long time ago, could'nt live without it to clean all those small parts :)
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0073_zpsghj20fds.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0081_zpsrnho45u7.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0084_zpsw9chx32u.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0109_zps5zlbqtxi.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0110_zpscoptznim.jpg)
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0111_zpspzu9bqa7.jpg)
And finished with the rooftop tent mounted, best piece of camping equipment ever :-) can't wait to hook it up to the CJ3a and go camping.
(http://i86.photobucket.com/albums/k118/gilibran/Jeep/Polynorm/DSC_0145_zpszfe7klno.jpg)
Only things left to do are find some matching 6 volts tail lights for the trailer and decide if i'm gonna paint the Jeep red or the trailer green again :D ;D ;D :D :D
-
One of the items on my very long "someday I'll do that..." list is to convert one of my trailers to a camping rig. Yours looks great. What is the tent sitting on? Do you have some type of collapsible platform? Or is it just sitting loose on top of the trailer for that photo?
-
And...are those trailer brakes?
A car that I coveted when I was a much younger guy was an early '60's Alfa Gulia. Always liked the looks of them. A late '60's Alfa Spider would also get my attention. The closest I got was a '73 Fiat 124 Sport. Cool Italian car with some quirks, but I really enjoyed it. It did not like our Colorado winters, so it had to go.
-
I made 2 crossmembers in the trailer, there's 2 rails with guides for brackets attached to the tent baseplate that simply clamp around the crossmembers. It cant tilt, that's something to do, but there's enough room left in the back to shove things under the tent in the trailer for now.
As for the brakes they are parking brakes only, i'm looking for a way to convert the hook, keep the original looks but use the brakes when driving. Probably something with a spring just behind the hook, make the hook assembly able to slide back and forth so the weight of the trailer engages the brakes but the spring helps them disengage when accelerating again. Otherwise it's going to be an interesting experience driving with the CJ3a's drumbrakes only ;D :D ;D
Something like this system:
(http://i86.photobucket.com/albums/k118/gilibran/242612_zps1qtzdjvn.jpg)
-
You have some neat stuff.� I find your trailer really interesting.� Thanks for sharing.
Tim