My Willys 3A and 3B Community
Your Projects => Non-Jeep Projects => Topic started by: SteveW on October 06, 2013, 05:26:11 PM
-
Could be helpful with some projects. I got a 14" cast iron skillet that was laying in the ground at a customers house. it was in pretty bad shape. They didn't want it and the previous owner had used it for catching the dripping from their outdoor grill and just left it. I cleaned most of the big stuff with a sander and steel wool and tried a couple other things but it still wasn't usable. I looked at some rust removal on You-tube and decided to give it a shot.
here is skillet
(http://www.surfacezero.com/g503/data/2023/medium/P1020034.JPG)
(http://www.surfacezero.com/g503/data/2023/medium/P1020035.JPG)
Here is set up, a plastic tub, some angle iron and 10 awg copper wire
(http://www.surfacezero.com/g503/data/2023/medium/P1020036.JPG)
(http://www.surfacezero.com/g503/data/2023/medium/P1020033.JPG)
(http://www.surfacezero.com/g503/data/2023/medium/P1020032.JPG)
Prior to solution, you don't want it too far away from positive metal but don't want it to touch either. This was just stuff on hand I used
(http://www.surfacezero.com/g503/data/2023/medium/P1020036.JPG)
Solution is just water and Borax powder probably about 1lb to start and just mixed it with a stick. negative to skillet and positive to wire 10 amps selected on charger
(http://www.surfacezero.com/g503/data/2023/medium/P1020037.JPG)
When you get it bubbling like this it is doing a good job, you can also look and see bottom being covered in rust. This was left alone for 13 hours
(http://www.surfacezero.com/g503/data/2023/medium/P1020038.JPG)
See the difference. That was an 18 gallon tub and skillet didn't fit
(http://www.surfacezero.com/g503/data/2023/medium/P1020039.JPG)
It cleaned up well and washed with hot water, oven dried and then seasoned with shortening. The smaller piece was in for 5 hours to clean
(http://www.surfacezero.com/g503/data/2023/medium/P1020042.JPG)
One day she will look like a proper skillet
(http://www.surfacezero.com/g503/data/2023/medium/P1020043.JPG)
I cooked 95 ounces of hash in it for a group of people from my Church who go camping over Thanksgiving Holiday 16 people and nothing left. We scrambled 18 eggs in it and it would hold 3 dozen easy. 2 things a cook likes is an empty pot and no talking when your food is being eaten :)
-
Not sure where to put this so if it is in wrong place please move it. You need to do this outside also as it makes a gas which eludes me right now and is not suitable for an indoor area. It is extremely inexpensive method and requires very little time.
-
Nope, no problem, this was the right place.
A very interesting project.
I love cast iron as well.
I've been using a cast iron griddle to make pancakes for several decades.
At one point, about 35 years ago, I gave my set of 3 frying pans to a friend. I later regretted it. We've bought two cast iron pans in the last few years. Going full circle.
-
Here is my collection as of now. Mostly new Lodge stuff but have some Wagner and Griswold iron as well. it would also have applications to clean parts on jeep items as well as other metal objects. I have gotten better metal pieces (rebar) for set up and going to try it on some parts for my trailer coming up.
(http://www.surfacezero.com/g503/data/2023/medium/P1020114.JPG)
I can feed about 200 folks I believe 8-)
-
Here is a link to using it on other than cast iron so for tools and parts it will do the job
http://g503.com/forums/viewtopic.php?f=48&t=241561
That is my set up with 4 rebars and improved wire and connections so I am set with it
-
This process does work well. Here is mine, with Jeep parts.
http://www.willysmjeeps.com/v2/modules.php?name=Forums&file=viewtopic&t=4714&postdays=0&postorder=asc&highlight=rust&start=0