My Willys 3A and 3B Community

Your Projects => Non-Jeep Projects => Topic started by: garage gnome on January 10, 2013, 04:31:24 PM

Title: My belated birthday present to myself
Post by: garage gnome on January 10, 2013, 04:31:24 PM
Tomorrow, my dad and I are flying out to John's (duffer) to get my belated Birthday present. It is a 1918 IHC Titan 10-20. 10HP at the drawbar, 20HP at the belt pulley. We're going to make a side trip and go snowmobiling in Yellowstone.

From the pictures John sent me, it looks to have a lot of original paint. I can see some original red and pin striping on the rear wheels. It still even has all 4 hub caps that always fall off! I sent the pictures to a friend that has two, and he said that this one looks to be used mostly for belt work and very little to no plowing of fields. He also said it is one of the best ones he has seen. I'm real excited to pick it up and meet John!

On the front of the water tank, you can make out the old IHC logo decal. Looks like the picture at the end.

(http://i748.photobucket.com/albums/xx125/willyscjmj/IMG_5848_zpsdd276df3.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/IMG_5847.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/IMG_5846_zps30deff07.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/IMG_5841_zps266c743b.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/IMG_5856_zps6e52c672.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/IMG_5903_zpsc06a9959.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/51A20E79-1D0F-48C0-92CF-CBA008E968A8-7182-00001091C97B0DEE.jpg)
Title: Re: My belated birthday present to myself
Post by: F Bill on January 10, 2013, 05:24:47 PM
How the heck are ya gonna fit that in your luggage?

Is it large enough to need escorts?

Congrats Nate, looks like it will be a bunch of fun. I can't wait for the videos.
Title: Re: My belated birthday present to myself
Post by: garage gnome on January 10, 2013, 05:35:08 PM
Haha Bill, we are renting a Uhaul and going to shove it in the back to haul it home.

There will be lots of videos and pictures of it.  :)
Title: Re: My belated birthday present to myself
Post by: johnrb3b on January 11, 2013, 08:10:43 AM
Quote
There will be lots of videos and pictures of it. �:)
Great. Looking forward to seeing them.
I'm an old Iowa farm boy so tractors interest me greatly.
If I could get out of this big city, I'd probably start collecting tractors too. I'm sure my wife would be thrilled.  ;D
Title: Re: My belated birthday present to myself
Post by: gmcjr on January 11, 2013, 02:04:18 PM
You know, it could come in handy, just in case  the jeep gets stuck. ;D
Title: Re: My belated birthday present to myself
Post by: Gunslinger on January 12, 2013, 04:42:36 PM
Oh Man, you have a project on your hands now!!  I used to do tractors, mine were 40s and 50s vintage and I can tell you that those components are a lot lighter than the ones you'll be dealing with!!!  An those wore me out !!!!  Good luck, I'm looking forward to joining you on this journey, from my easy chair of course!!!!
Title: Re: My belated birthday present to myself
Post by: garage gnome on January 16, 2013, 08:45:54 PM
Phew! Made it back today safe and sound.

Here she is at John's when I first saw it.

(http://i748.photobucket.com/albums/xx125/willyscjmj/C861F446-ECA6-4EF9-86C7-5258D4311E47-8438-0000123A1C0B3491.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/53D6F362-7A15-40DF-8E79-DA9BBE90D428-8438-0000123A2588CFF7.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/510980EC-F1B1-48DC-B5F7-BB9B734DD27C-8438-0000123A2AEA3E25.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/E40412C3-9528-43F4-9F5D-E11251AD5A62-8438-0000123A33160424.jpg)

It fit in the back of the truck with an inch to spare!

(http://i748.photobucket.com/albums/xx125/willyscjmj/024627EF-B538-494D-927C-11BEB566E66C-11358-0000155DEBD1DA99.jpg)
Title: Re: My belated birthday present to myself
Post by: garage gnome on January 17, 2013, 07:22:12 PM
Some pics of loading.

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/IMG_5946_zps5dd5020e.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/IMG_5956_zps7afbd84e.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/IMG_5965_zps6eb608d3.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/IMG_5974_zps7e60684b.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/IMG_5978_zps59193cf2.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/IMG_5994_zps6385e3aa.jpg)

Some pictures of unloading today.

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/IMG_1748_zps45b8bc5f.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/IMG_1749_zpsd14e307a.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/IMG_1756_zps6c74238d.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/IMG_1758_zps75b96a22.jpg)

And I started wrenching on it too. First thing was my dad and I jacked up all 4 wheels and put ATF in the grease cups. The bearings are good and tight which is real rare on these. They used a half *rear end roller bearing.

And then I popped the rear cover off. I was very worried about a bent rod or something horrific in there. Nothing wrong at all! Don't be fooled by the pics, the crank is close to 2" in diameter. The pistons are 6" in diameter or so.

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/0141D1C4-95AA-49A1-8809-70236DDCF9A8-11358-0000163F4114644F.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/7155D236-6EF8-431A-BF91-AA73D839A8FB-11358-0000163F47D01A92.jpg)

And then I drained the goop out of the transmission. If you worked on a farm fresh jeep, you know what this stuff is. It is found in the transmission, transfer case and differentials.

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/458C7281-E3EC-46BC-8B01-58E7EAB5A674-11358-0000163F4D8989B8.jpg)

The original shipping information on the starting flywheel

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/IMG_5935_zps0006155a.jpg)
Title: Re: My belated birthday present to myself
Post by: Bob W on January 18, 2013, 11:34:55 AM
That's a very cool tractor. I was thinking it was a lot larger when only the first photos were posted.
Title: Re: My belated birthday present to myself
Post by: garage gnome on January 19, 2013, 08:11:19 AM
Got the head off the Titan yesterday. One cylinder is perfect. The other had an open valve, so there is rust in there. It is not bad though. Jut minor surface rust. A wire wheeling and a light honing should clean it up nicely. The valve and valve seat are not bad too. When it was put away, someone plugged up the fuel hole in the carb and made sure the throttle and choke were closed. That's probably what saved it.

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/FCF59E0A-36F9-4163-B04D-B92C240B2BFD-12301-000017311BC50842.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/99075181-81B8-4D54-9470-25E1F115EC17-12301-000017312103CD45.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/E75E5E5B-7FAE-4C88-A2D4-91A0F95C3100-12301-000017312615643A.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/48E975A4-8194-4182-9C83-6150DB6969D2-12301-000017312B202C22.jpg)
Title: Re: My belated birthday present to myself
Post by: johnrb3b on January 22, 2013, 11:48:39 AM
Here are some cool videos of the Titan.
That would be a real hoot to own and run.

Starting
http://www.youtube.com/watch?v=Ahw68RWRaDQ

Running
http://www.youtube.com/watch?v=WuL7KR1lmWw

Starting and driving
http://www.youtube.com/watch?v=ytyJK6yJdFg
Title: Re: My belated birthday present to myself
Post by: 3aJeeper on January 22, 2013, 06:59:07 PM
What a great project....you are going to have a fantastic time putting that together and getting it running. Looking forward to watching the progress!  :D
Title: Re: My belated birthday present to myself
Post by: garage gnome on January 28, 2013, 08:52:07 PM
I got the pistons out finally. The rusted up one put up more of a fight. A porto-power here and a hammer there, it came free. I thought you guys would like the engine specs too, 20HP @ 500 RPM, bore: 6.5", stroke: 8", displacement, 531 cubic inches.

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/DFFC71AE-8A83-424E-97C3-38510BB30947-16091-00002024BF4AED18.jpg)

These pistons are in perfect shape. The ring grooves are still nice and square unlike the other set. The grooves on the other set are V shaped which is bad because the rings can't seal to the piston. I'll get some new ones though. These rings and pistons tell me this tractor had very little use. They usually look like that junk top ring.

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/AD67AD63-3AC9-45A7-B55B-88264D529175-15519-00001F50F9EB9E64.jpg)

And the rings. The top one came off a spare piston. The lower one is how all the rings looked on the pistons I took out. They still have some life left to them unlike the other.

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/1BFE2F38-EA19-4791-B503-5748DFD58DE1-15519-00001F50F4A14885.jpg)
Title: Re: My belated birthday present to myself
Post by: Bob W on January 29, 2013, 07:06:13 PM
Quote
displacement, 531 cubic inches.

Wow �:o , that's 4 times what our Jeeps have �;D
Title: Re: My belated birthday present to myself
Post by: garage gnome on January 30, 2013, 05:52:23 AM
Oh yeah, everything is big on this bad boy.

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/36821B57-6231-4916-84BD-17F9528E2B76-16691-000020F83F7D4A02-1.jpg)
Title: Re: My belated birthday present to myself
Post by: 3aJeeper on January 30, 2013, 09:52:46 AM
At least you're not chasing small parts around the floor! �;D

Hate when that happens.... �:D

That looks like so much fun....really enjoying the posts.
Title: Re: My belated birthday present to myself
Post by: garage gnome on January 30, 2013, 10:47:38 AM
Oh there are plenty of little parts to go with the big stuff, check balls, valve spring retainer clips, specialty bolts, and little mechanical oiler parts.
Title: Re: My belated birthday present to myself
Post by: garage gnome on February 05, 2013, 08:34:06 PM
Lots of new updates to share on the Titan's progress. I got the new piston rings in. I checked the ring gap in the bores and that was perfect, a tad wider than an 1/8".

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/8D058023-A0C1-4AB1-8804-911290392F49-261-0000001A5638E5A2_zpsf442003b.jpg)

New ring versus old.

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/99B1EE94-39B8-4F8D-B52F-10F1922F8702-261-0000001A5B2D5714_zps57128991.jpg)

I had to file the corners off because these rings are pinned on the pistons. You can see the pins here. And this rings are really easy to put on, probably easier than the automotive ones.

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/6D200024-74EB-472E-9A13-E9A31358AFA4-261-0000001A6042B519_zpsc66701ae.jpg)

And viola! Pistons are bark in there homes. I so can't wait to fire this thing up!

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/5AF93761-B2D8-47ED-A711-7BAD24848A40-261-0000001A771F6694_zps58fa03bf.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/58F4EAF4-7FA3-4919-A797-956085C60BA2-261-0000001A71000ABD_zps9d4f5d4a.jpg)

And I also got in the missing carb piece. I got a reproduction cap for it too and made a needle valve for it out of a 3/8" bolt and an old water spigot knob. At least these reproductions are exact, it even comes with the part number and IHC logo cast into it just like the originals!

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/6B90AB65-DC74-468F-9D60-6326358FC4B8-261-0000001A66EE046B_zps0c57c6cf.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/2A709D01-6FBB-4443-86E2-2CAAEEAB051A-261-0000001A6BFC64E8_zpsf4149667.jpg)

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/915E07FA-56BC-47A4-BC12-9CE3941A52C0-261-0000001A81384510_zps6f71b1e7.jpg)

And then to top it all off, I figured out what all the original writing says on the fenders and shift lever. Got to love the old time warnings. No mention whatsoever of where you shouldn't put hands or feet!  :o

This one says "Wait to shift gears until clutch stops"
(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/AC0A0CFF-528D-4805-B827-4C4989E150B9-261-0000001A48929A62_zpsec891d27.jpg)

"Chains too loose may break sprockets
Shift axle eccentrics to tighten chains
See instruction book"
(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/59EC400F-FB7B-4B9A-A45F-429B5D7ACE2C-261-0000001A42D4333C_zps4abf2166.jpg)


This is the hardest to read, but it says:
"Operator should enter seat
before shifting clutch lever"
(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/50DE889D-B388-4EDC-8E5E-EE01085F912E-261-0000001A4E0ABA6E_zps7cb091bd.jpg)
Title: Re: My belated birthday present to myself
Post by: 1955CJ-5 on February 10, 2013, 09:59:36 PM
Now that is just too cool!

We had one of those on the ranch in Nevada, I think it was a 1917, data plate boasted 10 drawbar horsepower. �You could see part of the I-H on one of the fenders..We never did get it to run, one piston was frozen solid..I tried all one summer to get it loose, but no luck. but I had no tools to speak of and had no idea what I was doing....

I sure hope you get it running....

Randy
Title: Re: My belated birthday present to myself
Post by: garage gnome on February 11, 2013, 09:13:13 PM
They didn't make 'em in '17. �;) Their production run was from '18 to mid '22. Then the Fordsons came out and that was the end of low RPM big piston tractors. What ever happened to it?

Yes, they did have an IHC logo on the backs of the fenders.

Oh, I'll get it running. Heck, I've revived much worst and I even built my own engine!  :o  ;D
Title: Re: My belated birthday present to myself
Post by: garage gnome on February 13, 2013, 06:05:52 AM
I got the head back on it and it has compression. I can't wait to fire this thing up!

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/15F3781F-1993-4A96-BA6B-20BD86A8A96E-2647-0000067955513D2D_zpsa62282a4.jpg)

A then I also found the original decals on the rear fenders. I has the IHC logo between two globes. Below that it has TITAN and then below it ays 10-20.

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/F595A494-7F97-4C67-9052-3B060890D681-2647-00000679628F87FF_zpsf5cf77ee.jpg)

same as above, different angle.

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/76776600-A591-4C96-BFCE-D9244C079289-2647-00000679680B6ECB_zpsaf077163.jpg)
Title: Re: My belated birthday present to myself
Post by: garage gnome on February 14, 2013, 10:29:03 AM
I pulled the water tank off today. It looks like swiss cheese on the bottom. :'( I might be able to fix it unless I can find a good used one.

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/AEF87170-2BA7-41AA-9150-E1EAD6A46713-3159-0000082BEDF57100_zps22d35acd.jpg)

Look at all the original gray paint under there.  :)

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/A9A3A5A7-B642-43D0-BEE2-3C49315D3A38-3159-0000082BE77BA64D_zps00665e14.jpg)

And then while I was oiling it down, I found some more original writing; the oil level for the governor.

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/2DCDB730-BF0C-44B9-9FC0-E83C87309E41-3159-0000082BF41A1174_zps812de228.jpg)
Title: Re: My belated birthday present to myself
Post by: Jeff_M on February 18, 2013, 10:24:05 PM
That thing is awesome.  And, you are a very talented young man.  I'll be watching for more pics!  And of course a video when it is running (I said "when", not "if")!
Title: Re: My belated birthday present to myself
Post by: Doug_3B on February 22, 2013, 08:57:54 PM
That thing is cool Nate!  You always have some sort of project going on, don't you?   ;D

Are parts readily available for that or are they hard to find?  I saw where you got a reproduction part in, do many companies make parts for these tractors?

Keep up the great work.  Like all the rest, I'm looking forward to seeing some video of this bad boy running!!
Title: Re: My belated birthday present to myself
Post by: garage gnome on February 24, 2013, 07:59:59 AM
Nope, only parts you can find for this are rings, valves, valve springs, some magneto parts, decals and paint. Everything else either has to be made  or find someone with a parts tractor.
Title: Re: My belated birthday present to myself
Post by: garage gnome on March 10, 2013, 09:58:31 PM
It lives!!! After cranking it over and over... I got it popping yesterday. Got frustrated and came back at it today. After some messing around, it runs just like it was shut off yesterday! The pitted cylinder has good compression too after some carbon build up.

http://www.youtube.com/watch?v=JY4qqxqfVEc
Title: Re: My belated birthday present to myself
Post by: Bob W on March 11, 2013, 06:29:22 AM
That is just too cool! Is it ready to go for a ride?
Title: Re: My belated birthday present to myself
Post by: garage gnome on March 11, 2013, 08:55:30 AM
Not quite yet. I still have to fix the water tank and get the proper lube for the transmission.
Title: Re: My belated birthday present to myself
Post by: 1955CJ-5 on March 30, 2013, 10:36:41 PM
Quote
They didn't make 'em in '17. �;) Their production run was from '18 to mid '22. Then the Fordsons came out and that was the end of low RPM big piston tractors. What ever happened to it?

Yes, they did have an IHC logo on the backs of the fenders.

Oh, I'll get it running. Heck, I've revived much worst and I even built my own engine! �:o �;D


Just finally getting back to your thread....hope you weren't holding your breath!

The old tractor was sold abut 15 years ago to someone who lived on the west slope of the Sierras..a tractor buff so I expect he got it running....

Yours is awesome...first one I've heard run...
Title: Re: My belated birthday present to myself
Post by: garage gnome on April 08, 2013, 08:30:57 PM
Well, at least it went to a good home!

Just one update so far. The water tank is done!

I too the end off that was facing the operator so I wouldn't loose too much patina. I built a new tank from an old in-ground lift oil tank. I made it a real tight fit and slid it inside the original tank. So now the old tank is just a skin and it has a beefy gut. I painted it flat black so it would be hard to notice through the holes.  ;D Tomorrow, I'll put it on, and this puppy will be ready to go!

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/85652D1F-9368-413A-B060-59BFEB9CCCBF-125-000000071D62EA42.jpg)

Title: Re: My belated birthday present to myself
Post by: 1955CJ-5 on April 08, 2013, 08:38:44 PM
You could put a little water in between the inside and outside tank, and let it leak out a little, just for special effects....

Looks great of course, and congrat's on the upgrade to Administrator!

Randy
Title: Re: My belated birthday present to myself
Post by: garage gnome on April 09, 2013, 11:25:32 AM
Thanks!

I got to drive it today! The steering leaves a lot to be desired. It makes the ross box seem like power steering!

http://www.youtube.com/watch?v=IafnhvPvFMM
Title: Re: My belated birthday present to myself
Post by: johnrb3b on April 09, 2013, 11:26:59 AM
Quote
... and let it leak out a little, just for special effects...
Just like our Jeeps.
Yours leaks doesn't it?
On mine, everything leaks.
 ;D ;D
Title: Re: My belated birthday present to myself
Post by: 1955CJ-5 on April 09, 2013, 11:35:50 AM
Quote
Thanks!

I got to drive it today! The steering leaves a lot to be desired. It makes the ross box seem like power steering!

http://www.youtube.com/watch?v=IafnhvPvFMM


That is just fantastic.....Those things put a lot of horses out of work!!
Title: Re: My belated birthday present to myself
Post by: Ryan_M on April 09, 2013, 06:27:39 PM
Very, very cool. Make sure you're not wearing any baggy clothing during that start-up procedure - Jeez!

So when's the overdrive going in it?
Title: Re: My belated birthday present to myself
Post by: garage gnome on April 09, 2013, 07:17:59 PM
Thanks guys! I hate baggy clothing! You'll never catch me in it.  ;)

I'll put an OD in as soon as you send it to me!  ;D

Randy, I would say it put about 20 horses out of work.  ;)  ;D
Title: Re: My belated birthday present to myself
Post by: Bob W on April 09, 2013, 09:46:45 PM
I like it  :)
Title: Re: My belated birthday present to myself
Post by: F Bill on April 09, 2013, 09:59:06 PM
What, no coal to shovel??? ;D

Now what are ya going to pull with it? Going to a plow day? Perhaps a nice big stationary combine?

Did you see the other Titan video on youtube, with the fresh paint and the canopy? I like yours better....That Patina thing grows on ya.
Title: Re: My belated birthday present to myself
Post by: garage gnome on April 09, 2013, 10:10:42 PM
Thanks Bob!

Good observation Bill! They invented this new stuff called gasoline which creates explosions to power the engine. ;D I'm going to pull the Famous off the trailer at shows and that is about it. I might run a log splitter with it at one show. It's working days are over now. Being close to 100 yrs old, wouldn't you want a break? �;D

Thank Bill. See, that new avatar is rubbing off on you. �;) Its making you see things my way. �8-) Yes I did see that video. The painted ones a more of a pain in the *rear end because of all the oil and grease they seem to spew. Its just easier to not have to deal with the fun of cleaning them. I have enough to do with cleaning the grease on my '53! �::)
Title: Re: My belated birthday present to myself
Post by: 1955CJ-5 on April 09, 2013, 10:25:50 PM
Ya know the one that sat in our yard for 30 some years was exactly the same color as yours!!

I always wondered how someone would go about cranking one of those things....
Title: Re: My belated birthday present to myself
Post by: garage gnome on April 10, 2013, 10:19:36 AM
There is a whole start-up procedure that I do prior to putting the hand crank on. I will take a video of that for everyone's enjoyment later on.
Title: Re: My belated birthday present to myself
Post by: 1955CJ-5 on April 10, 2013, 10:24:31 AM
It seems to me there was a plate on the oiler that required quite a number of cranks before starting....but I'll bet there is plenty more...
Title: Re: My belated birthday present to myself
Post by: garage gnome on April 10, 2013, 10:36:22 AM
Yep, there's that along with some other stuff.  ;) I'll take the video tomorrow morning.
Title: Re: My belated birthday present to myself
Post by: garage gnome on April 11, 2013, 10:54:15 AM
Hope you enjoy this video!

http://www.youtube.com/watch?v=o4B4z1czV_M
Title: Re: My belated birthday present to myself
Post by: Ryan_M on April 11, 2013, 11:29:26 AM
That is quite a contraption. Wouldn't make much a of getaway vehicle given the start-up procedure though, would it? Wow. I suggest the installation of a remote car starter  ;D.

Great video. Thanks for posting it.
Title: Re: My belated birthday present to myself
Post by: garage gnome on April 11, 2013, 11:36:43 AM
I usually only do this when it is cold. After I run it and shut it off and then start it back up, I don't have to do as much since it is already primed.
Title: Re: My belated birthday present to myself
Post by: johnrb3b on April 11, 2013, 12:13:18 PM
Great video Nate.
If I come out there, can I take a ride?  :D
Title: Re: My belated birthday present to myself
Post by: garage gnome on April 11, 2013, 12:49:20 PM
Sure!
Title: Re: My belated birthday present to myself
Post by: 1955CJ-5 on April 11, 2013, 10:51:10 PM
How many of us will it hold?

I noticed the stick earlier, but just now realized that it is your gas gauge......My 51 had one just like it, but a little shorter!!

Randy
Title: Re: My belated birthday present to myself
Post by: Jeff_M on April 13, 2013, 09:29:29 PM
Great video.  How on earth did you figure out all the steps to get that thing running?  I'm sure it didn't come with an owner's manual.... ;)
Title: Re: My belated birthday present to myself
Post by: garage gnome on April 13, 2013, 09:39:58 PM
I have other engines that require a similar process, but not that in depth. It is kind of obvious too when you look it, well, for me it was. Plus, the manuals I got with it have the start up procedure. �;D The only thing I had to find out from the manual was the squirting of gas through the primer hole, which made life a lot easier. I used to crank it forever.

I generally try to figure it out for myself though so then I'll remember it.
Title: Re: My belated birthday present to myself
Post by: garage gnome on April 17, 2013, 07:50:45 PM
Jeep vs Titan. Who will win?  ;D

(http://i748.photobucket.com/albums/xx125/willyscjmj/BB331A31-A4F4-4A30-8726-1E9520D3D81E-2165-0000049EC87C599F.jpg) (http://s748.photobucket.com/user/willyscjmj/media/BB331A31-A4F4-4A30-8726-1E9520D3D81E-2165-0000049EC87C599F.jpg.html)

(http://i748.photobucket.com/albums/xx125/willyscjmj/228802D1-D87C-40D4-B3BB-3C071B0EEACE-2165-0000049EC3C38FDB.jpg) (http://s748.photobucket.com/user/willyscjmj/media/228802D1-D87C-40D4-B3BB-3C071B0EEACE-2165-0000049EC3C38FDB.jpg.html)
Title: Re: My belated birthday present to myself
Post by: johnrb3b on April 18, 2013, 08:38:30 AM
Wow!
Those are some really cool  8-) pictures.
Keep 'em coming.
Title: Re: My belated birthday present to myself
Post by: F Bill on April 18, 2013, 08:57:09 AM
Looks like Nate's home for wayward tractors has a nice new gravel parking lot. �Do you guys need a nice crawler to do the maintenance there?? I know where there is an old one.......

We can't even get nice crusher run gravel like that here...gotta use Caliche....dusty messy stuff.
Title: Re: My belated birthday present to myself
Post by: garage gnome on April 18, 2013, 08:59:36 AM
We've got plenty of equipment Bill. My dad owns a construction company.  ;)

Thanks John!
Title: Re: My belated birthday present to myself
Post by: 1955CJ-5 on April 18, 2013, 09:43:59 AM
Looks like a (sorta) modern version of the Turtle and the Hare....

Great picture....
Title: Re: My belated birthday present to myself
Post by: garage gnome on April 18, 2013, 05:56:58 PM
Did a little posing today with it.

(http://i748.photobucket.com/albums/xx125/willyscjmj/Trip%20to%20Montana/titan.jpg) (http://s748.photobucket.com/user/willyscjmj/media/Trip%20to%20Montana/titan.jpg.html)
Title: Re: My belated birthday present to myself
Post by: F Bill on April 18, 2013, 06:21:16 PM
Nice oldie shot....even got the starving farmer look going on there!! :D

That's an ebay pic for sure.
Title: Re: My belated birthday present to myself
Post by: garage gnome on April 18, 2013, 06:24:18 PM
Haha, thanks Bill! I'm just skinny and strong, probably from cranking these old engines over and over!
Title: Re: My belated birthday present to myself
Post by: johnrb3b on April 19, 2013, 08:35:35 AM
Very cool pic.
That's an awful lot of tractor for that little trip rake.
And I see he hasn't taken the seat off of it yet, in case he needs to go back to pulling it with a horse when, not if, the tractor breaks.  ;D
Title: Re: My belated birthday present to myself
Post by: garage gnome on May 08, 2013, 08:04:14 PM
The line-up of tractors. The 8N has serious electrical issues I still need to work out.

(http://i748.photobucket.com/albums/xx125/willyscjmj/98A8345C-F1A9-49C4-97C5-D44B4FD8D098-10512-000017C9E788EDC0.jpg) (http://s748.photobucket.com/user/willyscjmj/media/98A8345C-F1A9-49C4-97C5-D44B4FD8D098-10512-000017C9E788EDC0.jpg.html)
Title: Re: My belated birthday present to myself
Post by: johnrb3b on May 13, 2013, 10:09:46 AM
Hey Nate,
If you were a little (a LOT) closer I'd help you out with the electrical - that's my thing.
Or maybe you could drive it here.  ;D
Title: Re: My belated birthday present to myself
Post by: garage gnome on May 13, 2013, 11:47:08 AM
It is so bubafied that I have to redo the wiring. At least it isn't too complex.
Title: Re: My belated birthday present to myself
Post by: johnrb3b on May 13, 2013, 12:20:45 PM
Hey, I just noticed you took the "tread" off the front wheels. What do they call that steel, steering traction ring on front wheels?
Title: Re: My belated birthday present to myself
Post by: garage gnome on May 13, 2013, 12:40:24 PM
It is called the guide ring. It made it a real PITA to steer. I still have them, but I won't be putting it back on anytime soon!
Title: Re: My belated birthday present to myself
Post by: garage gnome on May 13, 2013, 08:23:47 PM
My plan worked out perfectly, I can fit both the Titan and Famous on my engine trailer.

(http://i748.photobucket.com/albums/xx125/willyscjmj/1AA60017-8A0E-4690-A152-2CE73D0FF37B-1567-000004890E7FA709.jpg) (http://s748.photobucket.com/user/willyscjmj/media/1AA60017-8A0E-4690-A152-2CE73D0FF37B-1567-000004890E7FA709.jpg.html)
Title: Re: My belated birthday present to myself
Post by: johnrb3b on May 15, 2013, 08:33:52 AM
Cool.
You're all packed up.
Are coming out to visit me?
 :P
Title: Re: My belated birthday present to myself
Post by: Bob W on September 22, 2013, 09:50:41 PM
Saw this in Kansas
Title: Re: My belated birthday present to myself
Post by: PaulS on September 23, 2013, 09:35:05 AM
I missed that shot of the 8N before.  I've got one of those, too. And I'm pretty sure there's at least one more in this 3A group.

I can see yours has a Bubbafied fuel filter, in addition to whatever else Bubba did.  The stock 8N has three fuel screens--I can't see that it needs a filter, too!  (Of the three, mine came with one, and never had any issues.  I've got it up to two, now.)

The electrical is so simple, I don't know what problems you are having.  12V alternator or 6V generator?  I can't quite see in the picture if it's a front or side mount distributor.

Google JMOR wiring diagram for the best resource for wiring an 8N.

-Paul