So I have to admit I have been cheating on my Willys with my first love....a 1959 Chevy Biscayne.
This Biscayne has been in my family since the late 80's. Way back in the 60's, my father had a '59 Chevy while in the Army and he drove it from the base in Blyeville, AR to his parents house in Puxico, MO while he was dating my mother. After a few years of that, the '59 was replaced with a Chevelle, but Dad always remembered that car very fondly. In the late 80's, he came across this '59 Chevy and fell in love with it. He did a mild restoration on the car and relived his youth by driving it around to shows and just enjoying cruising in the car. The "Batmobile" was born. Along came the late 90's and his son was now driving age. The car had been around most of my life and helped form my love of old cars. This was the car I learned to drive a stick shift in. I learned how to work on and adjust drum brakes on this car. I had my senior pictures made with this and drove it to prom. I also learned a lot of other things in this car.......
Besides just looking cool, the '59 has a few other quirks about it that makes it unique. Most of the surviving cars of this year are Bel Air's or Impala's. This is only a Biscayne trim package...the lowest package Chevy offered. Instead of a V-8 it is only a 235ci in-line six with a un-synchronized three speed on the column (three on a tree). It does not have power steering, power brakes, A/C or even a radio. By and large, this is a very basic auto with no frills.
After I graduated high school, my Dad "sold" it to me for $100. He told me if I ever wanted to get rid of it, he would buy it back. While I had it, I fixed several things and just basically drove it and enjoyed it. Over the years, Dad and I have "sold" it back and forth two or three times. Every time, we always use the same $100 bill that we keep with the title. Fast forward to the present day. The Batmobile has been sitting for about 8-10 years with very little drive time. Dad has lost interest in wrenching on old cars and I have been tied up with business, family and Jeeps. As a result, the car has suffered quite a bit. The brakes were froze up, the suspension and steering bushings were rotted out, the exhaust was rotten and cancer has started to show up on the door corners and quarter panels. While talking to Dad one day, he offered to buy the parts if I would install them. How could I say no? A complete front end rebuild was in order. New upper and lower bushings, ball joints, bump stops, tie rod ends and idler arm were put on order. Also, new wheel cylinders and brake hoses were due. I also finally convinced Dad to splurge a little bit and add a front stabilizer bar to reduce body roll (which there is a LOT of when you go around a corner).
Once the parts finally arrived, I tore into the front end.

Years of leaky wheel cylinders and grease.

A few weeks later, I finally get back to reassembly

Driver's side done and ready to move to the other side!

Remember, this is not a frame off restoration. The intent is to get the car back to a safe, reliable cruiser. I plan on taking this on my car club's cruises with my family (since the 3A can't keep up with everyone

)
Finally, if I can sweet talk Scotty (the friend who painted my 3a), we may tackle the rust in the doors. :-?