The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:
Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: cjbilly
« on: March 06, 2021, 01:23:15 PM »

Thanks for getting back with me Rus.

What bearings and seals that we could read are already at the Motion Industries for pricing and availability. Luckily, we have found some addition info elsewhere.
Just was hoping someone had already gone this route and could share their findings/part numbers. We have saved our parts list on the several PTO gear boxes we have redone for our own jeeps. Wait till someone has to buy replacement parts for the PTO rear driveshafts. ;)

Posted by: Rus Curtis
« on: March 06, 2021, 12:11:44 PM »

Quote from: cjbilly on March 05, 2021, 03:43:04 PM
WTB / ISO- some replacement parts for our Ramsey DP-1 PTO shifter. Hope to source some of the bearings and seals locally if part numbers and manufacturers are available. If you don’t have loose parts, a parts broken/ damaged PTO shifter would likely work.

BTW- I have already contacted Herm- no spare parts at this time. Thanks!

cjbilly,

Don't have any experience on PTO's.  I know (have seen) shops measure for bearings so I wonder if you had those a shop could find replacements.  That idea confirmed here (Wes Knettle's quote):
https://cj3b.info/Tech/RamseyWinch.html

At the very least, I offer the below to hopefully spur more input - from those that may actually have some numbers for you.

Here's a website that has good info on multiple PTO's:
http://www.48cj2a.com/ptos.htm

It shows the DP-1 as twin stick for CJs.  I wonder how much difference there'd be on bearings/seals from a similar model (PT-1).

A link on the above page takes you to WillysTech page for PT-2:
http://www.willystech.com/wt/pto/ramseypt2f/ramseypt2f.htm

scroll to the bottom where he's added info on PT-1 from Tom Jacoby.  Hopefully, there may be some common parts.
Posted by: cjbilly
« on: March 05, 2021, 03:43:04 PM »

WTB / ISO- some replacement parts for our Ramsey DP-1 PTO shifter. Hope to source some of the bearings and seals locally if part numbers and manufacturers are available. If you don’t have loose parts, a parts broken/ damaged PTO shifter would likely work.

BTW- I have already contacted Herm- no spare parts at this time. Thanks!