Just a suggestion. Save yourself some fabrication effort on the bracket by checking the "mount hole indexing". There are at least two that I am aware of. It looks like both examples shown seem to be at approximate 180 degrees similar to my original generator mounting holes indexing. Mine now is a little greater than 90 degrees indexed with a fabricated lower bracket . That kept the center of the pulley closer to the block on the upper factory bracket adjustment area using a shorter belt and just slight upper bracket alignment adjustments. Here's an example to show the index difference.
https://www.ebay.com/itm/Remanufactured-100-Amp-ALTERNATOR-GM-Chevy-Chevrolet/192896807318?hash=item2ce98bb196:g:H2EAAOSwO2hb0Snw