The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:
Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: SteveW
« on: October 11, 2018, 07:50:09 PM »

My top is warped so I should have rinsed it off but did not. It is usable but does not fit tight all the way around rim.
Posted by: SteveW
« on: October 01, 2018, 12:40:59 PM »

I thought there was a tool use place but can't find it. Anyway I decided to rebuild my fuel pump which was heavily oxidized and crudded. Real pain to get stuff out of it so I took the small tub from my Lyman Turbo Tumbler and used a mixture of alcohol and kerosene to clean it. It worked very well. I was not sure what would happen so I drilled 2 holes in the cover about 3/8" in case some vapors built up. Nothing happened. You do get the top streaked from fluid so it will not be clear. It tumbles items and I cleaned both parts of the body and also the glass bowls. You can adjust the amount movement of tub by how tight the hold down fitting on the threaded shaft coming up from middle.