The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:

Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: mbullism
« on: October 18, 2016, 02:03:53 PM »

the oil collector is to ensure oil feed to the front bearing on an upslope, and I would surely default to keeping it if I had an open cage front bearing... the sealed bearing (such as what comes with the Novak kit) doesn't need the collector and you could leave it out...IMO
Posted by: Daves43GPW
« on: October 10, 2016, 10:01:44 PM »

All, thanks for the replies. I agree if the engineers put it in, there really isn't a good excuse to take it out. I'll add the collector to my shopping list.

Posted by: bretto
« on: October 07, 2016, 07:35:58 PM »

Are you talking about the oil slinger or the oil collector?  The slinger is essentially just a larger washer and it sits on the input shaft that slings away oil.  The collector cups around the front gears creating and oil channel directing lube on the meshed gears and it bolts to the front of the housing
There's no good reason to have either off not to other than you just are lazy and don't feel like putting it on.  Too add to Oilly's post, you get low on the oil level and hit a steep long climb, you'll wish that collector was there.
Posted by: athawk11
« on: October 07, 2016, 10:21:26 AM »

I agree with Leaker.

I will generally default back to the original specs created by the designers/engineers of these components.� These were pretty smart guys.� It wouldn't be in there if they didn't think it was necessary.

Hawk
Posted by: Oilleaker1
« on: October 07, 2016, 08:36:23 AM »

I just read where it's there to worm up oil for the front needle rollers if your oil level gets low on you. Probably want it. John
Posted by: Daves43GPW
« on: October 06, 2016, 08:16:39 PM »

I'm curious as to what people's opinions are of the oil slingers in the T90. I see on the web some people remove these as they claim they don't really do anything. My T90 had the delete option but I can pick up a NOS slinger for a few bucks. Is it worth adding it back in?

Thanks,
David