Posted by: Carls_jeep
« on: May 01, 2014, 11:59:35 PM »Going lower may help if you going to do some rock climbing.
Welcome to our new forum software.
We are now using SMF instead of YaBB.
T-90C
'The T-90 used from used from 1963 to 1971 with the F-head four-cylinder engine is designated as the T-90C. It features top shifters, a seven inch input shaft (stick-out length) with 15/16ths inch, 10 splines and a felt-sealed front bearing retainer assembly. Since the T-90C uses a case marked 'T90A,� you will need assurance that the transmission in question came from a post '62 Jeep, or you will need to pull the top cover and count teeth. The T-90C has a 16-tooth, helically cut input gear. The cluster gear has a 35-tooth driven gear, resulting in a 3.44:1 first gear and a 1.85:1 second gear.