Posted by: Tumbleweed
« on: November 19, 2013, 10:20:46 AM »I originally had this on 2 furniture dollies that I got from Harbor Freight but that did not work so well -

When I put new springs on my '53 several years ago, I noticed that it was a tight fit. The shackle should have some threads protruding out of the end of the spring, just enough so you can screw the other piece on. I cranked mine in by hand a couple turns and then blasted them in the rest of the way with an air gun. It should be a very tight fit there.
I would not modify it in anyway. When you put the piece in with the grease fitting, back it off a half to 1 turn. The way these shackles work is, one half is left hand thread and the other is right. So when the spring is compressed, the shackle either tightens or loosens slightly. That is why there needs to be a tight fit between the spring and the outer piece.
I put a comment in the "Leaf Spring Repros" thread.
I'll put similar info here.
First a question.
Are all the springs being refered to as "difficult to install" Omix-Ada parts?
I bought my springs, U-shackles and bolts from Walk's and the whole thing bolted together with NO problems. Piece of cake. Carl told me his springs were US made.
I'm getting the feeling from multiple threads on all the old Willys forums, that the Omix springs are a poor option.
Anybody have experience to oppose that?
Meanwhile, my suggestion is to talk to Carl Walk or Alcan Spring.
Even if more expensive, in the long run, you'll get a better product that's easier to install. And Alcan will custom build to your payload requirements for not much more money.
possibly one of the most frustrating things that I did during the rebuild.
