Posted by: BMIC
« on: December 21, 2012, 04:09:24 PM »Correction Bill... You drove a 69 Bug, my mistake your not that old...
Welcome to our new forum software.
We are now using SMF instead of YaBB.
On a VW forum I am on ... once I get my "new" 69 on the road.Bill!

Reading FBil's first look post and Johnrb3b's reply in another section of the forum is making me a bit nervious. Obviously 9" brakes do not have the stopping ability of 11" brakes, but are they that bad? Unsafe?Nope, not unsafe for the vehicle as designed. With a sane top speed of 45 mph the brakes are adequate. If you repower or even add overdrive, you can drive faster than the brakes are good for. I can go over 60m mph in my 3B but SHOULD NOT. With stock brakes and steering, you should stay within the Jeeps 1940s design envelope. Is your picture of a right side (passenger) brake assembly? If so, you're good. If it's driver side then the shoes are backwards. Long shoe faces front. That makes a BIG difference in stopping power.
Rocketeer made a convincing case in another thread for a duel master cylinder but is it wasted time and money rebuildinng the 9" brake system? My last Willy's was over 30 years ago but I don't remember braking being an issue. Thoughts on this...Yes, dual circuit brakes are a good safety feature. If you blow out a wheel cylinder or a flex hose to a front wheel, you'll have no brakes. I've had that happen twice in 50 years of driving over 2 dozen vehicles. In both cases I was able to coast safely to a stop. Both were OLD vehicles with LOTS of miles and rust on them. One blew a metal brake line, the other a flex hose. If you redo your brake lines, hoses, wheel cylinders, etc. then the odds of something rusting out or breaking are nill. So do the dual circuit master cylinder if it'll make you feel safer. Most old Willys never get one and I have yet to hear a�story of lost brakes on any of the forums I frequent - 2A, 3A, 3B and Old Willys.
