Posted by: Tumbleweed
« on: May 04, 2012, 11:36:55 AM »Hey John,
I ran into the same issues with my transmision gears. There was water in the case and as a result most of the gears were pitted so bad I had to replace them. I was just going to clean the teeth up and let her run but experience has taught me that cutting corners on these rebuilds will cost you more down the road. You may also find a good used unit out there. The other thing is that in most cases you will have to replace the syncronizer for sure to keep it from popping out of second gear - a common problem -
Good luck
George
I ran into the same issues with my transmision gears. There was water in the case and as a result most of the gears were pitted so bad I had to replace them. I was just going to clean the teeth up and let her run but experience has taught me that cutting corners on these rebuilds will cost you more down the road. You may also find a good used unit out there. The other thing is that in most cases you will have to replace the syncronizer for sure to keep it from popping out of second gear - a common problem -
Good luck
George

