The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:

Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: mud pie
« on: March 06, 2012, 07:12:05 AM »

For the truly lazy (like myself), Beachwood sells a template of the bow and footman loop locations.  Just tape it on the body, mark the holes with a Sharpie, then drill away.
Posted by: bretto
« on: February 25, 2012, 07:53:25 AM »

This photo is from Wes over on the willysmjeeps.  Very knowledgeable gent.
Posted by: athawk11
« on: February 17, 2012, 11:26:41 PM »

Hi John,

Your welcome. �Hopefully, this helps. �The 3A, 2A �and 503 pages have been so helpful to me. �I can rarely help folks in return. �There are so many smart Willys people out there. � This was my chance to help someone else. �

I did cut my original panels and welded in the tool inserts. �I used Jpet's  drawings.  (2A Page). �I really liked the way the tools look hanging on the side of an old Willys. �That is probably why I ended up dressing my 3A like an M38. �Like you, I also liked the functionality and the way the M38 Top bows look. �Especially in the stored position.

Good Luck with your project.

Tim
Posted by: Ranger41
« on: February 17, 2012, 09:44:16 PM »

WOW!  This is perfect.  Thanks so much for the details and photos.  That 3A looks great.  Did you add the tool inserts to the tub?

John
Posted by: athawk11
« on: February 17, 2012, 03:32:54 PM »

Okay Ranger,
Hopefully these photos help. �Keep in mind, �I started the measurement from the back of the Willys �I used a square at the back to position the tape measure.





Posted by: athawk11
« on: February 17, 2012, 10:40:42 AM »

Hi Ranger.
I did the same. �I'm not home right now, but I can measure mine and post them later today.

I will say that mine may not be dead on spec. �I positioned the front most stowage bracket at a point where I thought the top bow looked the best when in the stored position. �





Tim

Posted by: Ranger41
« on: February 16, 2012, 11:19:45 PM »

I'm considering placing an M38 top on my CJ3A - not militarizing it - I just prefer the look and function.  Can anyone steer me towards measurements for the placement of the bow brackets along the body sides?  Thanks.

JB