The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:
Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: FarmJeep
« on: November 25, 2011, 12:01:54 PM »

Quote
Barry, I was looking at the part you need to make and got to thinking. I can make a drawing of the outline of the part from the top and the side to show it's form and curvature and I would have to mail the drawing to you to be sure it is exact size to the original.

The other option is I can bend one up for you that is as close to the original as I can make it and send it to you.

Which do you prefer? I have the 1/4" rod laying on my workbench right now.

Those are both generous offers, but having a rod in hand would be wonderful.  If you drop me a line at Barry@farmjeep.com, I'll send you my address.

BTW, there isn't a big hurry.

Thanks again!
Barry
Posted by: Carls_jeep
« on: November 25, 2011, 10:57:34 AM »

Barry, I was looking at the part you need to make and got to thinking. I can make a drawing of the outline of the part from the top and the side to show it's form and curvature and I would have to mail the drawing to you to be sure it is exact size to the original.

The other option is I can bend one up for you that is as close to the original as I can make it and send it to you.

Which do you prefer? I have the 1/4" rod laying on my workbench right now.
Posted by: calvinhunt
« on: November 23, 2011, 02:08:37 AM »

Quote
Quote
Quote
�Thank you for the help and sorry for being such a bone head.
Barry
Don't worry about.  We're all in this together (and we enjoy our old Jeeps).  You can see that there is a lot of help here so take advantage of it and we're glad you have joined us.
Posted by: FarmJeep
« on: November 22, 2011, 10:14:33 AM »

Quote
Barry, do you still need a diagram for the U shaped rod welded to the windshield frame?

If you have a diagram, that would be great.  I think I may be able to construct something based on the old note, but I can use all the help I can get.

Thanks,
Barry
Posted by: Carls_jeep
« on: November 22, 2011, 09:45:00 AM »

Barry, do you still need a diagram for the U shaped rod welded to the windshield frame?
Posted by: FarmJeep
« on: November 22, 2011, 06:47:20 AM »

Quote
Quote
�Our windshield is missing the wire that is used to hold the vent handle in the open/closed position. �The only information I've found is here - http://cj3apage.proboards.com/index.cgi?board=Tech&action=display&thread=1225

I knew there was quite a discussion on this topic on the old forum. �Now I see it's the one you included in your original question. �Doesn't it answer your questions completely? �

I  just read the complete thread and it does give me what I need.  Don't know how I missed it the first time.  Thank you for the help and sorry for being such a bone head.

Barry
Posted by: calvinhunt
« on: November 21, 2011, 11:28:14 PM »

Quote
�Our windshield is missing the wire that is used to hold the vent handle in the open/closed position. �The only information I've found is here - http://cj3apage.proboards.com/index.cgi?board=Tech&action=display&thread=1225

I knew there was quite a discussion on this topic on the old forum.  Now I see it's the one you included in your original question.  Doesn't it answer your questions completely?  
Posted by: Carls_jeep
« on: November 21, 2011, 10:17:22 PM »

Tomorrow I'll take some measurements and photos to see if that helps you.
Posted by: FarmJeep
« on: November 21, 2011, 04:32:34 PM »

Quote
I guess your referring to the spring on the lever. I never have liked the way the vent lever works so I made my own.


No, I'm missing the wire that the handle "hooks" to so that the vent stays opened or closed. �It appears to be a bent 1/4" or so rod to a "U" and tack welded to the windshield frame. �My was ripped off somewhere along the line, so the vent just flaps. �Could you do a quick measurement on how long (including the bend) the wire might be?

Thanks!
Barry
Posted by: Carls_jeep
« on: November 21, 2011, 11:52:33 AM »

I guess your referring to the spring on the lever. I never have liked the way the vent lever works so I made my own.

Posted by: FarmJeep
« on: November 20, 2011, 02:13:54 PM »

Been away for a while, but back to finishing up our mystery 3a. �Our windshield is missing the wire that is used to hold the vent handle in the open/closed position. �The only information I've found is here - http://cj3apage.proboards.com/index.cgi?board=Tech&action=display&thread=1225 �

Has anyone done a fabrication or have a source for a replacement?

Thanks,