Well I just want to say thanks for all the help you guys gave me onthe oil pressure issue, thought an update was in order. I pulled the motor out and took it apart, I found that the rear main seal was totally disintegrated and the pieces went into the crank and wiped out the rod and main bearings. That had to have happened right at start up cause the OP never did come up to where it belonged. I showed it to the guy that originally put it together, he said he had heard from the G503 guys that this can happen with some brands of seals. I'll check and make sure I get the right brand names before I post them. Looks like dejavue all over again. rebuild time.
