The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:

Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: Gunslinger
« on: December 26, 2012, 07:32:39 AM »

[size=24][/size]Don't try that at Home !!
Posted by: Ryan_M
« on: December 14, 2012, 12:56:15 PM »

The whole time I was reading that I'm thinking "I bet he was able to still drive the jeep afterwards", and sure enough, I made it to the last sentence.

Sounds like quite a ride and I'm sure it got the adrenaline pumping. Good to know the roll bar did its job.
Posted by: duffer
« on: December 13, 2012, 10:03:01 PM »

Quote
So what happened? Did you get hit and roll the Jeep?
Think winter, very windy, and a lot of snow, although the road had been plowed so there were just drifts.  Front hubs locked in and in 4x4, just having a lot of fun blowing right through them until one sent the front end nearly straight up.  Did a complete somersault, came down on the right end of the bumper and flipped.  Roll bar went through the top and windshield was pretty much gone.  Rolled back on the wheels and drove it home.
Posted by: gmcjr
« on: December 13, 2012, 07:18:55 PM »

Fwiw, when I was 17, I was trying to do a three point turn around in dads 2a, when the left rear tire found a ditch I didn't see because of the grass and because I was 17, she did a lazy roll on the driver side and the roll bar was the only thing that stopped it from rolling on top of me. Don't get wrong ,I'm not saying that you need one, or they are a complete cure all. Hell, if i wasnt willing to take a risk, I wouldn't be driving my Jeep. the but they do work. I agree the Jeeps look better without one for sure, I put one on mine.
Posted by: Ryan_M
« on: December 13, 2012, 06:48:43 PM »

So what happened? Did you get hit and roll the Jeep?
Posted by: duffer
« on: December 13, 2012, 12:38:40 PM »

I know this is an old thread, but I have done dynamic testing (55 mph) of a wheel well mounted roll bar and it passed the test just fine (Note, I can't recommend this type of dynamic testing).  As long as the tub sheet metal is in good condition and the bar is mounted with a back-up plate they will take a considerable load.  In my case, the body rails were bent down about 3" on both sides but there was no damage to the mounting and absolutely no deflection in the bar (still using it).

I do like the look of a Jeep without one, but I will also not drive one without roll-over protection (or belts).  And as noted above, trail use or not, it makes little difference.  IMO, you are most likely going to need it for the idiot in town that runs the stop sign/light.
Posted by: Jesse
« on: September 18, 2012, 08:46:31 PM »

Might as well get rid of it, the thing will just tear off the tops of the fenders.

I put on a rollbar from a wrangler, which mounted to the frame through the floor. Cut those mounts off, bolted the front part to a beam that connects the two under the body and to the frame. In the back there are L bracket type things made from the same 2x4 beam that tie to the frame. Doesn't 'look right' but would probably be better than nothing in a crash.

-Jesse
Posted by: Bob W
« on: August 29, 2012, 10:04:18 PM »

I think the fender mounted roll bars work far better than most people think. Usually we are not talking about a NASCAR crash with your old Jeep. I've been over on the side with only a fender mounted roll bar and so have some of my friends. They seem to hold up fine. Of course you do need a seat belt too.
Posted by: Gunslinger
« on: August 29, 2012, 07:00:00 PM »

Its really up to you, if you hate it pullit, I use mine to mount my shoulder harness seat belt, not because I do crazy off road stuff, but it makes me feel a little safer on the city streets I drive.  And it makes my wife a little less worried.... your call.
Posted by: NoCoWillys
« on: August 28, 2012, 12:24:27 AM »

johnrb3b,
Your Dad makes an impressive sight in your jeep!  A true hero!  

Yea, my roll bar is just bolted to the fenders and "reinforced" by being bolted through the side of the body.  It's ugly and no protection at all.  In my 90YJ I have a full cage that is tied into the frame.  I'm not planning on really wheeling this thing so I'm not worried of rolling it.  If I'm going fast enough to roll it on the street, I doubt the roll bar would help me anyways.  
Posted by: Carls_jeep
« on: August 27, 2012, 05:33:54 PM »

When I bought my Jeep it had a roll bar just like yours. After inspecting it I realized it is worthless and is only to give a visual feeling of safety. In a roll over it would collapse and get in the way of getting out. Even it you weld cross bars to make an X in the bow it would still rip out of the fenders it's bolted to.

The only safe roll bar is one welded or bolted to the frame and that still depends on the thickness of the metal and how well it's manufactured.

I have kept the roll bar in case I go to a commercial trail ride park that requires one. They don't care if it is safe or not, they just want to see a roll bar.
Posted by: johnrb3b
« on: August 27, 2012, 11:05:40 AM »

I will NOT drive without a seat belt.
But
I still haven't installed the roll bar that I've had in the garage for 2 or 3 years.

Even though the most common roll bar is merely bolted to the rear wheel housings, it is still better than using your head for the fulcrum in a rollover. If you're doing street driving, the most likely cause of a rollover would be being hit broadside by something bigger.

If you drive fast (45 or over) then you might roll over on a corner if you're not careful. A high speed rollover might tear off the roll bar so the issue turns into a crap shoot at that point.

I will eventually put the roll bar on so I can go off-road at the parks near Chicago. But only for that. I prefer to not have it most of the time since I do parades with my Dad.
https://jeeps-folbots-etc.epizy.com/jeep/parades/parades.html
A roll bar doesn't cut it for parades.

And if you remember, the famous Joe Kennedy Jeep rollover accident in 1973, that Jeep had a roll bar but the people were not wearing seat belts so one girl was paralyzed and David Kennedy badly hurt. Without the roll bar, maybe there would have been some deaths. But, mind you, that was a case totally determined by the stupidity of the driver, not the equipment in the Jeep.
Posted by: Quebec Jeep
« on: August 27, 2012, 10:43:49 AM »

If the roll bar is not properly attached to the frame, it's useless. And it might be more dangerous because you will think that you are safe.

If the roll bar is attached correctly, then you might want to use safety belt as well.

I pulled mine off since it was bolted to the rear fender and I did remove the seat belt in the same time.

I prefer to get ejected if it roll.
Posted by: NoCoWillys
« on: August 26, 2012, 12:36:13 AM »

Thanks for the reassurance that I'm not crazy to want to pull it.  I just hate the way it looks.  Crazy trail rides are for my monster Jeep anyways.  It goes!
Posted by: athawk11
« on: August 25, 2012, 11:00:49 PM »

I had a similar set up. �I didn't own the Willys 30 minutes before I pulled mine off. �I'm pretty sure if I rolled the Willys, it would have been torn right off and I would have been crushed by it. �It was just bolted to the wheel wells, and not tied into the frame.

As Bill mentions, it depends on what you want to do with your Willys. �If you want to be authentic, lose it. �If you want to do some crazy trail rides, it might save your life.

Tim