The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:
Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: MikeP
« on: July 24, 2019, 05:12:05 PM »

yes there is supposed to be a clamp but that fuel line is actually for a lawnmower cause the stuff the filter came with was a bit to big and the clamps wouldnt hold it tight enough but maybe this is y its losing fuel cause the old filter held fuel
Posted by: SteveKfl
« on: July 24, 2019, 08:23:29 AM »

Have you tried putting a clamp on the top line of the filter to prevent "syphoning" from gravity?
Posted by: MikeP
« on: July 24, 2019, 06:37:01 AM »

my fuel pump and my filter and the filter is empty after a day or 2 thats what im referring to as supposed to stay with fuel in it
Posted by: scoutpilot
« on: July 24, 2019, 05:30:11 AM »

If you are referring to the glass bowl on top. No. It is not supposed to be full. As long as the fuel level in the pump is at or just above the brass screen, it's fine. The air bubble is necessary.
Posted by: MikeP
« on: July 23, 2019, 05:42:29 PM »

so my fuel pump works great (i think) and when i went to start it again i noticed the fuel filter was empty so my question is does the fuel need to stay in the filter or is it supposed to do that and if it does need to stay in there does that mean my fuel pump needs a rebuild?