The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:
Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: Gunslinger
« on: April 12, 2018, 11:03:25 AM »

I did buy a new one for Triple X, probably a Crown?  Been a while but it was bent up a bit.  I did repair several tractor steering wheels, they were severely cracked and missing pieces in the bakelite.  I used the epoxy filled plumbers puddy, it looks like a tootsie roll with an epoxy filler in the middle, break off a piece and roll it in your hands until the puddy and epoxy are mixed then mold it in to the wheel, filling the cracks.  It hardens in a bout 5-10 minutes and you can sand it to shape and either add more or paint it.  I often used hardware store acrylic spray paint.  Worked well. But be careful to only use a little at a time as it may harden before you get it applied to the wheel.
Posted by: cbauer
« on: April 11, 2018, 04:54:43 PM »

I used JB weld to fix the cracks and gouges and sanded it to smooth out any imperfections then used a appliance epoxy paint from Home Depot to finish off.
Posted by: Dutch_Jeeper
« on: March 02, 2018, 01:28:45 PM »

Well not really restoration but:







Takes about 100ft of paracord for the outer circle, more or less the same for the spokes and binge watching some netflix serie while doing it ;D ;D
Posted by: aboyandhisdog
« on: July 11, 2017, 06:34:56 PM »

Thanks a lot, Tim.  Those QTM wheels are made by crown and from what I can tell, the Crown ones are the way to go.  I think I'll order one up.
Posted by: athawk11
« on: July 11, 2017, 03:40:06 PM »

Unless you're insistent on keeping the original wheel, I would recommend getting a new one.� I purchased mine from QTM Parts.

It's the best price I found and the quality is good.� It looks just like the originals.� Shipping...Fast.

http://www.ebay.com/itm/Jeep-Willys-CJ2A-3A-Slat-grill-GPW-early-black-steering-Wheel-/270822160940?epid=1757827108&hash=item3f0e423a2c:m:mZFiBn9UhmMwKrcjZQSowrw&vxp=mtr

If you want to try to fix yours, there are a couple threads I've seen where guys use an epoxy filler to fix cracks, then they smooth them out and paint them.

Oh, This guy also has the green wheels for the M38...

http://www.ebay.com/itm/Jeep-Willys-M38-M38A1-MB-GPW-Solid-OD-Green-steering-wheel-NOT-Painted-800737-/272128929586
Posted by: aboyandhisdog
« on: July 11, 2017, 11:10:29 AM »

I either need a new steering wheel or need to do some restoration on mine.  So, need some information: 

Is there a company or person who is doing this kind of work?
 
Or, how can I do it myself?

Or, It looks like Crown and Omix are the only ones making new...is one better than the other?  Is there another new Steering wheel supplier that you know of who makes a great wheel? 

Mine has been disintegrating in my hands for years and it is time I do something about it.  Input is much appreciated!