The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:

Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: SteveW
« on: November 22, 2013, 10:32:39 PM »

Nice to find coupler. I am not positive but think you can get repair parts for it in 1 7/8 ball. Are those 15" rims? It doesn't matter anyway as Ford's up into the early 80's I believe had same bolt pattern as Jeep. Getting better and better for you.
Posted by: Ryan_M
« on: November 22, 2013, 06:40:02 PM »

I removed the rest of the "mods" from the trailer tonight and was somewhat pleased to find the original coupler buried beneath it all.  It's a bummer that it has been bent, drilled, and is pretty much ruined but the bright side is the damage is limited to the coupler itself. Once I find a replacement coupler I should be able to install it without too much trouble.

The original safety chains appear to still be intact too, minus the hooks. Each one was extended to accommodate that gaudy replacement coupler but I removed all the extras. I'll need to find a new set of hooks along with a set of tailgate chains.

The jack was installed so tightly that it bent the frame lip in a couple places but I should be able to bend it back into place.

I removed the Ford hub caps, leaving the bare Ford rims. They are surprisingly close in appearance to the 2A/3A style rims but they too will be replaced.





Posted by: Ryan_M
« on: November 22, 2013, 03:21:44 PM »

Hub caps are marked "FORD MOTOR COMPANY".

Anyone here have a '79 Crown Vic they are restoring? I am willing to trade a pair of wheels  ;D
Posted by: 1955CJ-5
« on: November 22, 2013, 03:17:28 PM »

Major score!

No doubt about it....
Posted by: SteveW
« on: November 22, 2013, 02:47:10 PM »

Truly almost a museum quality body. Those are original Grote reflectors. Any period CJ rims would be fine 16X4.5. You have the landing leg intact. O.D. Red and Green only 3 colors and you have that figured out. That would be stunning with a bow set and cover on it. I wouldn't sweat the chains too much but if you can find an original Fulton hitch that would be a good addition. Looks like an original license plate bracket also. What is marked on the hub caps?
Posted by: garage gnome
« on: November 22, 2013, 12:48:33 PM »

That is mint!
Posted by: Ryan_M
« on: November 22, 2013, 12:21:52 PM »

I got the trailer home this morning. I immediately removed the aluminum cab and gave it a quick bath. I'm cheating a little here by posting photos of it still wet but the thing is in amazing shape. I've learned that it was almost always garaged when not in use. It was originally OD and has been repainted its current color twice. All of the metal is original with nothing being repaired or reworked. It came to me with a cut-to-fit piece of plywood which was used as a bedliner that obviously did its job protecting the floor. Serial number is "17287" which I believe makes it a '47.

I mentioned earlier in this thread that the tail lights, wheels, and coupler are not original and the safety chains are missing. I still don't know a lot about these trailers so if anyone notices anything else out of the ordinary - good or bad - I'm curious to hear it.








































Posted by: Ryan_M
« on: November 21, 2013, 03:36:31 PM »

Quote
I hope that trailer is big enough to hold the Christmas presents your going to have to buy your wife this year!

Great addition to the growing fleet...


At the rate I'm going I hope the trailer is big enough for me to live in.
Posted by: BMIC
« on: November 21, 2013, 03:27:20 PM »

I hope that trailer is big enough to hold the Christmas presents your going to have to buy your wife this year!

Great addition to the growing fleet...
Posted by: Ryan_M
« on: November 21, 2013, 02:53:32 PM »

Haha thanks Tim. So tell me then, why is it this free stuff keeps costing me so much money????????

This trailer was supposedly purchased at the same time as my MBT trailer, which was picked up as war surplus by my great grandfather around the same time he bought (brand new) what is now my '51 3A. My great grandfather got the MBT and his neighbor, Al, bought this T3-C. Al is the original owner and had possession of it until my Dad got it yesterday. I intend to have it in my yard by tomorrow at this time.

And thanks for the link SteveW, I've been crawling around that site for the past couple days now. I see pics of yours posted there too. I'll submit my info there soon.
Posted by: athawk11
« on: November 21, 2013, 02:44:29 PM »

Man, some people have all the luck. First an M38, and now this.

You're a pretty good guy.  Must be all the Karma points you have stored up.

That is a beautiful trailer.  Congrats!! :)

Tim
Posted by: SteveW
« on: November 21, 2013, 02:27:32 PM »

Boy is that a nice one. I have a 46 trailer that will be next on the to do list. I will post a link to a great trailer site for the civvy bantams. Here is the trailer site. looks you have a tag on yours so pop it into the data base.

http://bantamt3c.com/
Posted by: Ryan_M
« on: November 21, 2013, 02:19:18 PM »

interior shot
Posted by: Ryan_M
« on: November 21, 2013, 09:08:11 AM »

My resourceful father (Jeff_M) managed to acquire this little gem yesterday and has generously stated that I may adopt it.

I saw it personally in September and from a quick once-over it appears amazingly clean. The original tail lights, safety chains, and Fulton coupler are missing and the wheels are not original but the frame and tub are about as good as it gets.

The '80's vintage custom-cap may or may not stay on - I'll have to take a closer look and decide. It is held in place with 8 bolts that have been drilled through the tub, which is unfortunate, but not a detrimental modification. I'll post some more detailed pics and a SN once I get it home - hopefully later this week.