The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:

Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: Ryan_M
« on: July 15, 2013, 08:41:32 PM »

After very minimal gains I pulled mine off and installed it on a '46 2A with EXTREMELY sloppy steering. It initially seemed to reduce play from 1/2 turn to rough 1/4 turn. I was about to take it for a test drive (and my first ever drive in that particular Jeep) but the clutch rod broke the first time I stepped on the pedal to put it in gear. New clutch rod on order. Will report back when I have more info.

Admittedly, I do feel a very slight but noticeable difference in the slop in my freshly rebuilt 3A steering box now that the Tightsteer is gone.
Posted by: Tumbleweed
« on: July 15, 2013, 04:43:03 PM »

That thing is huge! - ooops - forgot to shrink it down to size. Looks like it is close to the fender - were there any fit issues? I might get one for my 53 wagon.
Thx

Tumbleweed
Posted by: Quebec Jeep
« on: July 15, 2013, 11:29:28 AM »

Mine is in place now. Hope to test it soon.  :-/ :'( I still have a lot to do before then.

For those who wonder how it's look like:
Posted by: Carls_jeep
« on: June 26, 2013, 08:52:51 PM »

Yes, it would not make much difference on a rebuilt box but it will help to keep even wear on the worm and sector.
Posted by: Ryan_M
« on: June 25, 2013, 08:03:16 PM »

I've driven 100 or so miles now using the TightSteer. Can't say it's really that much of an improvement. I'm sure if it was an old�sloppy steering box it would make a world of difference. Since mine has pretty much all new components it really wasn't worth it...yet. That may change as the internals wear down a bit and I can take up any slack by adjusting the TightSteer.
Posted by: Carls_jeep
« on: June 25, 2013, 07:36:56 PM »

Yes they do a good job. I made three of them, one for me and two for two friends.
Posted by: Ryan_M
« on: June 13, 2013, 10:48:10 AM »

I bought one before I even had my Jeep back together and it is still sitting on the shelf in my garage. I replaced virtually every component of the steering box during the rebuild. I wanted to make sure I knew what "normal" felt like before installing the Tightsteer so I could tell if it made a difference. I had pretty much forgotten about it but looks like the time has come to install it. Thanks for the reminder Nate!
Posted by: 1955CJ-5
« on: June 13, 2013, 12:01:26 AM »

And another success story! I put one in the 55 CJ-5 and I won't go back...the 51 will probably get one, but first I need to get it put together....
Posted by: calvinhunt
« on: June 12, 2013, 11:50:11 PM »

Hear Hear!� I posted a similar success story last summer when I installed a TightSteer on the 47 CJ-2A I'm keeping for a friend (you've seen that Jeep in some of my posts in past years).
Posted by: garage gnome
« on: June 12, 2013, 09:43:27 PM »

At the Picnic, I won a tightsteer. I put it in my '53 and lets just say, I'll be getting another for my '49.  ;)

It turned my already great driving '53 into a superb driver!