The CJ3A Page CJ3B.info

Recent Posts

Pages: [1] 2 3 ... 10
1
Your CJ-3A Project / Re: New acquision, Lost Biscuit
« Last post by Rus Curtis on Yesterday at 03:17:45 PM »
Is it my imagination or are the headlights smaller than typical? 

2
Your CJ-3A Project / Re: New acquision, Lost Biscuit
« Last post by derekredmond on Yesterday at 08:03:38 AM »
Glad to see another of Dave's Jeeps go to a great home.  You are the guy for the job!

(Anybody not familiar with John's work, see https://CJ3B.info/Owners/Goering.html)

Derek
3
Once You've Joined / Re: I'm 6'3" and I want a jeep!
« Last post by derekredmond on Yesterday at 07:58:34 AM »
I'm 6'2" and never found leg room to be a problem in my CJ-3B, but I had the late-style seats that have a bit of adjustment -- see https://CJ3B.info/Seat.html.  You will find those in a 60's or late 50's 3B.  Some people around our height do prefer more room, especially in an early 3B, and move the seat back by cutting the rear fender well -- see https://CJ3B.info/Tech/Legroom.html.

You should certainly be able to find a very good 3B for under $18,000.  For example the 1964 Navy 3B that Joe Evans is currently selling in Tennessee for $17.5K -- see https://www.facebook.com/CJ3B.info

Good luck.

Derek
4
Once You've Joined / Welcome Aruz802
« Last post by Forum Master on Yesterday at 07:36:12 AM »
Welcome to the CJ DJ 3A 3B Willys Community Forum Aruz802!

Tell us more about you and your Willys!

We love pics so don't be afraid to post pics of your Willys.
Here we like any kind of them!

You will find a lots of smart people here that are willing to help.
Enjoy your stay,
Pascal and all forum members

5
Your CJ-3A Project / New acquision, Lost Biscuit
« Last post by duffer on October 05, 2026, 04:06:19 PM »
This is the late David Eiler's Lost Biscuit "race Jeep".  He didn't get it finished.  As received, frozen up even fire 231, T18 (which would appear to be spanky new), D20 with the D18 2.46:1/Bronco gear set, flanged, centered D44 w/a Detroit Locker rear axle, and an open D30 up front with an aftermarket disc brake conversion.  The axles and frame are of 73-75 CJ5 origin.  Fiberglass tub/fenders/hood.  The only actual 3A parts are the grill and windshield frame.  David has it sitting on some long (front 46", rear 50") 2.5" wide springs.  And four Desert Dog tires on 10" turbine wheels-3 to 4 decades old?


I'm going to try and preserve David's legacy but there will be more than a few changes to get it road worthy and trail capable.
6
Your DJ-3A Project / Re: 1957 DJ3A
« Last post by 48willys on October 04, 2026, 12:30:35 PM »
Sometimes progress looks like the opposite of progress. 😂
Its good to be at the stage of tear down though. At this point, hopefully I can address some mechanical stuff, finish the bottom of the tub and start on paint.
7
Once You've Joined / Re: I'm 6'3" and I want a jeep!
« Last post by Mark W. on October 02, 2026, 04:16:43 PM »
In my local Facebook Market place there are 22 flat fender jeeps for sale prices ranging from $1000 to $16,000 in all manner of condition. This is Western Oregon and SW Washington for the most part.

8
Once You've Joined / Re: I'm 6'3" and I want a jeep!
« Last post by jdouglasj on October 01, 2026, 09:36:50 PM »
Well thank you, that was a thoughtful reply. I am in Bristol, TN
9
Once You've Joined / Welcome FrancoDescalzo
« Last post by Forum Master on October 01, 2026, 08:57:47 PM »
Welcome to the CJ DJ 3A 3B Willys Community Forum FrancoDescalzo!

Tell us more about you and your Willys!

We love pics so don't be afraid to post pics of your Willys.
Here we like any kind of them!

You will find a lots of smart people here that are willing to help.
Enjoy your stay,
Pascal and all forum members

10
Once You've Joined / Re: I'm 6'3" and I want a jeep!
« Last post by Rus Curtis on October 01, 2026, 02:45:43 PM »
Welcome!

I'd say, maybe.  You didn't mention your location.  There are jeeps to be had. Fully restored can be advertised for more than your budget and projects in varying degrees of completeness can come in a large spread for the asking amount.  Posting where you are, may produce an offer close by.

Some here will advertise the need to sell and they'd be in great shape, timing plays a part. 

It sounds like the interior dimensions will be a factor.  Military and CJ-2A jeeps have a little less leg room.  The 3As and 3Bs have a bit more leg room (the wheel wells were shortened and the seats pushed back, I think I remember 2 inches).  I think the early CJ-5 has the same leg room (I read the 3A/3B seat frames are the same as in the CJ-5.

Finding a rebuilt/reliable driver will be the challenge - the more time you have, the better chances of finding what you want.  Changing your level of "current condition" can also affect options.

There are multiple places to check.

Here, in the Classified Ads section.  See what has been posted and even add your Want To Buy ad.
(I counted 5 jeeps advertised for sale since 2023).

eWillys (offline for maintenance right now - good location to filter for the model)
https://www.ewillys.com/

I remember reading multiple Facebook sites hosting jeep sales.

Also, Oldtime who's posted here often has advertised his 3B

https://www.thecj2apage.com/forums/1953-cj3b_topic55244.html

as of May 2026, it was still available.  I think it's in Missouri.

Good luck!

Pages: [1] 2 3 ... 10